Bike buying advice · Public discussion

AMF Pro Tour Roadmaster—junk?

Started by emelie · · Last activity · 6 posts · 10,560 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Bike buying advice
Published
18 June 2010
Last activity
19 June 2010
Original author
emelie
Posts
6
Discussion status
Public discussion
Total views
10,560
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. I know nothing about bikes and just bought a [FONT=Times New Roman]‘70s AMF Pro Tour Roadmaster. I paid $80. Was I robbed? ...The gears and brakes seem to work well. [/FONT]
    [FONT=Times New Roman]Thanks![/FONT]

  2. If it's been sitting, the grease may have hardened in the hubs and bottom bracket. Try to drip some oil into the seam between the parts that turn and the parts that don't, after wiping away any grit. Do it every few rides. Don't use wd40 or a similar product because it's more of a solvent and rust preventative than a lubricant.

  3. I know a little bit about that bike. It was one of the nicer AMF bikes they had in the 70's. It has a lugged frame, three piece cranks, and center-pull brakes. Whereas most of the AMF bikes then were more like the Huffys with cheaper(heavier) one piece cranks, a plain welded frame, and cheap stamped steel side-pull brakes. Your bike is more similar to what a moderately priced Nishiki or Schwinn would have been like then. It is a decent rideable old ten-speed type bike.
    You will probably want to get some new tires to replace those old dry gumwall ones and as Garage Sale Gt said try to get some fresh lubrication into the parts. Im sure you will get $80 worth of use out of it as long as it gets ridden.

  4. Hey, Garage Sale GT & Chainringtattoo - Great adivce. Many thanks!

  5. Chainringtattoo said:

    Whereas most of the AMF bikes then were more like the Huffys with cheaper(heavier) one piece cranks, a plain welded frame, and cheap stamped steel side-pull brakes.

    I think the cheaper ones were internal lug brazed.

    They make nice flatproof 27" tires now. If that thing has chrome rims, then don't inflate the tires past 70 PSI.

  6. emelie said:

    I know nothing about bikes and just bought a [FONT=Times New Roman]‘70s AMF Pro Tour Roadmaster. I paid $80. Was I robbed? ...The gears and brakes seem to work well. [/FONT]
    [FONT=Times New Roman]Thanks![/FONT]


    There is one shown on the Old Ten Speed Gallery
    Barney’s Roadmaster Pro Tour | Old Ten Speed Gallery
    It appears to be fairly basic (steel cottered crank set, steel rims, stem shifters, brakes with safety levers, hi-tensile steel frame), but nothing wrong with that. The fellow who posted to OTSG seems to like his. Falcon derailleurs? If the tires are useable, and the paint and chrome are in nice condition, $80 is probably the going market rate in many areas. Well worth $80 if you put some miles on it.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.