aluminum bearing housings

joel burgess said:

hey i've been working on a custom aluminum uni frame for a bit now but i
can't find any aluminum bearing housings for sale and i dont now any
one that can build them for me . im looking for the same kind as the
ones on the 05 kris holm uni ,if any one knows of any i could by or
some one that makes them can you please reply or send me an e mail
burg_01 at hotmail.com thanks..joel burgess

Hey Joel,

I have an aluminum fabricator who can make anything out of aluminum. I
am designing a custom Coker frame now.
He has built me bearing housings for a project in the past.
I am seeing you in a week. If I can help just let me know.
You can call me at (516)702-9807.

Adam

--
JustOneWheel

There is no better way to have Fun and Exersize. "UNICYCLE"
------------------------------------------------------------------------
JustOneWheel's Profile: http://www.unicyclist.com/profile/9237
View this thread: http://www.unicyclist.com/thread/44993

Wait, if you are making an alumunim frame, then that entails at least
making the top half of the bearing holders. If you can't do that, how
will you do the rest?

Bearing holders aren't that bad with a milling machine, rotary table,
and t-slot cutter. A good starting machining project if you would like
to learn.

Why do you need aluminum bearing caps, though. I have an aluminum
frame, and I use stock Yuni bearing caps on it, because theyy're cheap,
durable, and, well, adaquate. They are better than al. for grinds and
pedalgrabs.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/44993

gerblefranklin said:

Wait, if you are making an alumunim frame, then that entails at least
making the top half of the bearing holders. If you can't do that, how
will you do the rest?

Not if he isn't machining a frame. He is probably building a frame from
tubing that is welded.

--
Tellurider

There's a fine line between "Hobby" and "Mental Illness".
------------------------------------------------------------------------
Tellurider's Profile: http://www.unicyclist.com/profile/4972
View this thread: http://www.unicyclist.com/thread/44993

I considered that, but regardless, he's going to need some bearing caps
to weld on. And even if you weld, there's still machining involved. You
have to machine the seattube bore to the proper diameter.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/44993

That's why he is trying to find bearing housings so he doesn't have to
make them himself. I assume he is wanting both top and bottom parts and
will weld the tops onto the frame. The seat tube you can buy with the
right wall thickness and standard OD and you can avoid having to have
it bored out. With a 1 1/4" OD and a wall thickness of .083 it works
out perfect for a 27.2 mm seatpost.

--
Tellurider

There's a fine line between "Hobby" and "Mental Illness".
------------------------------------------------------------------------
Tellurider's Profile: http://www.unicyclist.com/profile/4972
View this thread: http://www.unicyclist.com/thread/44993

Tellurider said:

The seat tube you can buy with the right wall thickness and standard OD
and you can avoid having to have it bored out. With a 1 1/4" OD and a
wall thickness of .083 it works out perfect for a 27.2 mm seatpost.

I was thinking about that. You dont have to worry about outside.

In the next twoish years I'm going to make a Ti unicycle. Everything I
can out of Ti.

I dont know of any Al bearing housings you might need to make your own.

--
Tim

Tim 'Braun' (http://www.tim.com.mk/izdanija/1/189.jpg)

Smoking Jagurs old pipe.

mmm sponsored by Arrow Racing good.
------------------------------------------------------------------------
Tim's Profile: http://www.unicyclist.com/profile/4671
View this thread: http://www.unicyclist.com/thread/44993

Tim said:

I was thinking about that. You dont have to worry about outside.

I dont know of any Al bearing housings you might need to make your own.

Yeah you don't need to worry about it but tubing comes in standard OD
sizes and then different wall thicknesses I'm building a frame with a
24.4 mm seatpost and it is a 1 1/8" tube with a .059 wall thickness and
seat post clamps are sized to fit standard OD sizes.

I know he won't find any bearing holders that are pre made but you can
have them made for you like Just one Wheel did.

--
Tellurider

There's a fine line between "Hobby" and "Mental Illness".
------------------------------------------------------------------------
Tellurider's Profile: http://www.unicyclist.com/profile/4972
View this thread: http://www.unicyclist.com/thread/44993

Tellurider said:

That's why he is trying to find bearing housings so he doesn't have to
make them himself. I assume he is wanting both top and bottom parts and
will weld the tops onto the frame. The seat tube you can buy with the
right wall thickness and standard OD and you can avoid having to have
it bored out. With a 1 1/4" OD and a wall thickness of .083 it works
out perfect for a 27.2 mm seatpost.

I've been through this. i've bought Al. tubing of that exact type,
however the tolerances on the extrusion aren't accurate enough for a
seattube. At the very least I had to run a reamer through it. In some
cases I ended up using a boring bar.

You can buy "tubing" spec'd either way. For tubing it's spec'd by OD
and wall thickness, for pipe it's spec'd by ID and either guage or
schedule, suck as 16 guage or schedule 40. Your average handrail tubing
is 1" sch. 40 pipe.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/44993

I have only used cromoly steel tubing and have had great luck with that
for seat tubes but I haven't tried building with aluminum. I guess it
may be less consistent. All I was trying to say is that there is more
than one way to build a unicycle and most people don't have milling
machines of their own but can have these things done by a machine shop
if nessasary. But I personaly want to encourage people to give it a try
to build their own uni it can be frustrating but also very rewarding.

--
Tellurider

There's a fine line between "Hobby" and "Mental Illness".
------------------------------------------------------------------------
Tellurider's Profile: http://www.unicyclist.com/profile/4972
View this thread: http://www.unicyclist.com/thread/44993

Tellurider said:

Not if he isn't machining a frame. He is probably building a frame from
tubing that is welded.

your right i am NOT machining a solid aluminum frame:eek:

--
joel burgess
------------------------------------------------------------------------
joel burgess's Profile: http://www.unicyclist.com/profile/7685
View this thread: http://www.unicyclist.com/thread/44993

first of alluminum cant be welded to any other metal thats why i need
the alluminum bearing housings and i have welded cromoly steel before
and i personaly think alluminum is quite a bit harder to weld

--
joel burgess
------------------------------------------------------------------------
joel burgess's Profile: http://www.unicyclist.com/profile/7685
View this thread: http://www.unicyclist.com/thread/44993

hey thanks very much for the help ill consider all of that !!! ..
joel

--
joel burgess
------------------------------------------------------------------------
joel burgess's Profile: http://www.unicyclist.com/profile/7685
View this thread: http://www.unicyclist.com/thread/44993