On Wed, 10 Aug 2005 15:17:38 +0100, "Paul - [censored]"
<[email hidden]> wrote:
I
Quoted message said:just dunno how to get it set for a different circumference wheel ... 😉
Mine is the one with a solar panel on as well as a battery ... if it makes
any difference .. 😉
hope it's this one :
2 buttons:
B is on the left
A right
Press and hold B and A buttons for 2 seconds or after the replacement
of battery, the unit is switched to wheel size input mode. Multiply
wheel diameter, in millimeters by 3.1416 to determine wheel factor,
Press the B button to select digit to be input and the A button to
adjust the digit to the desired number (hold for fast advance). Press
the B button again to KM/MILE selection. (Note: Removing battery will
erase Wheel Size Input) Fig. 8
For convenience you can refer to the chart of wheel diameter size
factor inputs.
wheel" /enter
20" 1596
22" 1759
24" 1916
26" 2073
26.5" 2117
26.6" 2124
26.8" 2136
27" 2155
28" 2237
KM / MILE Selection
After the wheel size input, the following function is selection of
kilometers or miles as the measurement for distance. Press the A
button to choose between Kilometer (KM) and Mile (M), press the B
button to confirm.
After KM / MILE selection, press the A button to set your age and
weight. Press the B button to confirm your setting.
Age
Weight in Kg ( when Km is selected ) or Weight in Pounds ( when Mile
is selected
Maintenance Program
It is used to remind you for the parts replacement or
to lubricate the chains and wheels after the preset distance is
reached.
Right after KM / MILE selection, the preset total distance of 600
km(or miles) will flash, press the A button to select ., ,
between 200, 400 , 600 & 800 km (or miles) and press B
button to confirm.
For example, if 600 km is selected, the spanner (&**) will' fiash
whenever the total distance (ODO) reach 600, 1200, 1800 km
(or miles).
Press the B button to stop flashing of spanner (**)-^
EL Backlight
The EL backlight can be turned on either as follows:
1 . Holding the Ateutton for 2 seconds The EL light will be turned on
for 8 seconds and the computer will then go to the fast scarf mode
with trip " . distance, maximum speed, average speed and trip timer
displayed once.
2. Press once on the B button The EL light will be turned on for 4
seconds and the computer will go to the freeze frame memory mode as
well.
Speed Comparator (Cadence)
A "+" or '-'-" sign appears to the right of the speed. "+" indicates
you are traveling faster than your average speed (AVS). A "-"
indicates .you are .riding slower than your average speed.
service Hotline - 0049 / 6341-284337 (Germany)
[email hidden]
Quoted message said:
--
Paul ...
(8(|) Homer Rules ..... Doh !!!
abandon your simpsons deity it serves you poorly .... and praise the
omniscient god of OCR