40 Tooth Middle Chainrings

"Grenouil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does anyone make a 40 tooth 130mm BCD five bolt middle chainring with ramps and pins?

I once made one for an insistent customer because I couldn't find one either. The hubris of
manufacturers who pretend to "know" that you don't want one. . .

--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

In article said:

Does anyone make a 40 tooth 130mm BCD five bolt middle chainring with ramps and pins?

Specialites T.A. (Traction Avant!) makes them. <http://www.peterwhitecycles.com/chainrings.asp> and
scroll down to the 130mm Bolt Circle "Alize" section.

--
Drew W. Saunders

dru (at) stanford (dot) eee dee you

Quoted message said:

Does anyone make a 40 tooth 130mm BCD five bolt middle

Quoted message said:

chainring with ramps and pins

Didn't Shimano make a triple with 50/40/30? B

"Grenouil" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

Does anyone make a 40 tooth 130mm BCD five bolt middle chainring with ramps and pins?

Is 39 tooth close enough? Go to www.biketoolsetc.com and search for Item #FS-RR39M.

You'll get: FSA Road Chain Ring, 5-arm, 39t, 8/9sp, 130mm BCD, Black, Middle Ring on Road Triple.

Jeff

"Grenouil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does anyone make a 40 tooth 130mm BCD five bolt middle chainring with ramps and pins?

Thanks for the inputs - the Specialités TA stuff looks like a possible - at least they appear to be
pinned - not ramped though? Also seems that Stronglight might make something suitable.

I just installed a TA Alize triple with a 40T middle ring. Shifts fine with my Ultegra 9sp STI.
There aren't those bubbly ramps like on shimano, but there are some groove-type things as well
as the pins.

"Grenouil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Grenouil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Does anyone make a 40 tooth 130mm BCD five bolt middle chainring with ramps and pins?

Thanks for the inputs - the Specialités TA stuff looks like a possible - at least they appear to
be pinned - not ramped though? Also seems that Stronglight might make something suitable.

"KBH" <[email hidden]> wrote in news:1046294445.65364@sj-nntpcache-3:

Quoted message said:

I just installed a TA Alize triple with a 40T middle ring. Shifts fine with my Ultegra 9sp STI.
There aren't those bubbly ramps like on shimano, but there are some groove-type things as well as
the pins.

Where did you get the TA rings?

Got the whole crankset from Peter White Cycles www.peterwhitecycles.com

Kyle

"Frank Riley" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

"KBH" <[email hidden]> wrote in news:1046294445.65364@sj-nntpcache-3:

Quoted message said:

I just installed a TA Alize triple with a 40T middle ring. Shifts fine with my Ultegra 9sp STI.
There aren't those bubbly ramps like on shimano, but there are some groove-type things as well
as the pins.

Where did you get the TA rings?