25.4 bar in 26 stem

http://aebike.com/site/page.cfm?PageID=30&SKU=SM1069
25.4 to 26 shims

"Gary Jacobson" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Gary Jacobson
Rosendale, NY

Gary Jacobson said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Gary Jacobson
Rosendale, NY

Not certain what difference the faceplate makes, but there are shims
available. Someone posted one link; Nitto also has them (or the link
shows Nittos without being named) and your LBS should be able to get
them easily.

On Fri, 09 Apr 2004 00:33:51 GMT, "Gary Jacobson"

may have said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Use a shim. 0.6mm = about 0.024", so you need a shim that's about
..012" thick. This would be more layers of soda can than I'd be
comfortable with, especially on handlebars. Even though the clamp
might appear able to grip the bars without a shim, it almost certainly
won't be safe that way.

--
My email address is antispammed; pull WEEDS if replying via e-mail.
Typoes are not a bug, they're a feature.
Words processed in a facility that contains nuts.

gary-<< Any trouble with using a 25.4 bar in an "open face" 26 stem with a
"face
plate"? >><BR><BR>

Probably bottom the face plate and the hbars will still be loose.

There are some shims out there to help this.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

Dan Daniel <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Gary Jacobson said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Gary Jacobson
Rosendale, NY

Not certain what difference the faceplate makes, but there are shims
available. Someone posted one link; Nitto also has them (or the link
shows Nittos without being named) and your LBS should be able to get
them easily.

Harris Cyclery sells the Nitto shims:
http://www.sheldonbrown.com/harris/stems.html#raisers
I tried finding them in the QBP catalog but couldn't. I'm pretty sure
they're there, though.

Jeff

Gary Jacobson said:

Quoted message said:

Quoted message said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

"Pop Top" ("pillow block"😉 stems are generally much less fussy about
small differences in bar size than one-bolt stems, because they don't
rely on flexing the stem to clamp the bar. If it clamps the bar without
the top and bottom faces coming into contact, you should be fine.

Dan Daniel

Quoted message said:

Quoted message said:

Not certain what difference the faceplate makes, but there are shims
available. Someone posted one link; Nitto also has them (or the link
shows Nittos without being named) and your LBS should be able to get
them easily.

Jeff Wills said:

Harris Cyclery sells the Nitto shims:
http://www.sheldonbrown.com/harris/stems.html#raisers
I tried finding them in the QBP catalog but couldn't. I'm pretty sure
they're there, though.

Thanks for the plug. One of the things about the online Quality
catalogue is that if a product is out of stock at QBP, it won't be
displayed in the catalogue...even if _we_ have it in stock.

Sheldon "Pop Top Fan" Brown
+-----------------------------------------------+
| I'll be appearing as Preposteros in |
| Gilbert & Sullivan's Thespis at M.I.T. |
| April 9-10,15-17 http://web.mit.edu/gsp/www |
| http://sheldonbrown.com/music.html |
+-----------------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

Using a piece of emory cloth that is glued to bar works fine. I used
Crazy Glue.

On 09 Apr 2004 14:35:49 GMT, [email hidden] (Qui si parla

Campagnolo ) said:

gary-<< Any trouble with using a 25.4 bar in an "open face" 26 stem with a
"face
plate"? >><BR><BR>

Probably bottom the face plate and the hbars will still be loose.

There are some shims out there to help this.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

Gary, go down to local liquor store, buy a Sapporo in a can (big 20 0z
silver can), drink the beer, then cut shim out of can. Sapporo cans are the
best in the business for a great and reliable shim. The aluminum is THICKER
then regular soda or beer cans and will be perfect for a 25.4 to 26.0 shim.
Good luck

Quoted message said:

From: "Gary Jacobson" <[email hidden]>
Organization: Road Runner
Reply-To: "Gary Jacobson" <[email hidden]>
Newsgroups: rec.bicycles.tech
Date: Fri, 09 Apr 2004 00:33:51 GMT
Subject: 25.4 bar in 26 stem

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Gary Jacobson
Rosendale, NY

Gary Jacobson said:

Any trouble with using a 25.4 bar in an "open face" 26 stem with a "face
plate"?
I wouldn't think so but I wouldn't want to find out I was wrong after I
suffer the consequences of not asking.

Gary Jacobson
Rosendale, NY

A while back there was a thread about seatpost shims in which poster
claimed that mylar is the perfect material for making shims. Many people
have collaborated this claim.

Kenny Lee

Werehatrack said:

Use a shim. 0.6mm = about 0.024", so you need a shim that's about
.012" thick. This would be more layers of soda can than I'd be
comfortable with, especially on handlebars. Even though the clamp

..012", IIRC, is standard light-duty aluminum drip edge flashing for
shingle roofing. Home Depot probably has it for under $5 per 10 foot
length. Any roofing supply warehouse will definitely have it. It may
be .019", however, especially in regions with heavy winters. That
would work too for a stem with a faceplate (not one-bolt).
--
Rick Onanian