24 inch tires

sorry but you aren't going to find many tires that would be good for
muni that are that skinny. go talk to your local bikes shop and see if
they have some ideas.

--
markf - movie nerd

stuck in iowa and unemployed.
------------------------------------------------------------------------
markf's Profile: http://www.unicyclist.com/profile/8102
View this thread: http://www.unicyclist.com/thread/39693

are you trying to fit one on a torker? if so it'll prbly fit a 2.3-2.5
because i measured the gap to be 3" between the forks
BUT
if you insist on under 2.2
get a cheap-ass Kenda 1.95 for 13 bucks
just ask ur local bike store

--
ColDawG - Level 4 after 2 months

Looking for MUni buddies!
------------------------------------------------------------------------
ColDawG's Profile: http://www.unicyclist.com/profile/9503
View this thread: http://www.unicyclist.com/thread/39693

^ yeah its a toker, you think i can fit a 2.5 on it?

--
UNIwolcott - UNI FOOL
------------------------------------------------------------------------
UNIwolcott's Profile: http://www.unicyclist.com/profile/8144
View this thread: http://www.unicyclist.com/thread/39693

measure the gap and see for yourself 😄
i think a 2.3 would be safe (specialized makes some of that size)
2.5 might work, i actually put my friend's trials wheelset in my LX
frame and it was fine, although some say those 2.5" Monty trials tires
aren't exactly 2.5 inches, but it fit w/ a pinch of clearance

--
ColDawG - Level 4 after 2 months

Looking for MUni buddies!
------------------------------------------------------------------------
ColDawG's Profile: http://www.unicyclist.com/profile/9503
View this thread: http://www.unicyclist.com/thread/39693

Which Torker do you have? CX, LX, DX, TX?

Do you have a LBS with good selection or downhill shop in your area?
Check what they have in stock. You may find a "narrower" downhill
tire.

A couple years ago when I was looking for tires for my stop-gap (before
I got a real Muni) Schwinn Muni I found an Arrow Racing-HD at a downill
shop that says 24x2.5 but it measures closer to 2.25 at the outside of
the lugs. I googled but can't find current mention of the tire anymore
though.

'This thread' (http://tinyurl.com/a49ct) has a pic of the tire next to a
hookworm 24x2.5.

--
UniBrier - Its Time to Ride

Steve DeKoekkoek

Hop Drop & Roll

------------------------------------------------------------------------
UniBrier's Profile: http://www.unicyclist.com/profile/1404
View this thread: http://www.unicyclist.com/thread/39693

Well, I have a Torker DX but a 20 inch, and I was wondering the same
thing UNIwolcott. What is the biggest Muni tire you can fit on one of
those?

--
thejuggler24 - Ride giraffes backwards
------------------------------------------------------------------------
thejuggler24's Profile: http://www.unicyclist.com/profile/7792
View this thread: http://www.unicyclist.com/thread/39693

Count me in as wondering what the biggest tire is I can get on to my new
torker LX. I'm just a beginner now- But I imagine the first thing I'm
going to want to do as a stopgap to buying an actual MUni will be to
throw a burly tire. There's always the WalMart 24X1.95 tire, but if I
could go bigger, I would, just on principle...

--
mboulanger - UniNoob
------------------------------------------------------------------------
mboulanger's Profile: http://www.unicyclist.com/profile/9642
View this thread: http://www.unicyclist.com/thread/39693

as i said earlier, i used a 1.95
but i just got that because i wore a hole (a few actually) through my LX
stock tire in a couple of months, and then i got a KH '05 :-P
It ROCKS so yeahh, get one of those as soon as possible (if you have the
dough)
also,
a 2.5" monty or similar trials tire SHOULD fit fine in the LX frame (a
20" wheel), but, the rim would be too narrow to prevent foldover (it'll
happen all the time) so either get a Muni, or get a trails wheelset to
pop into ur torker frame

--
ColDawG - Level 4 after 2 months

Looking for MUni buddies!
------------------------------------------------------------------------
ColDawG's Profile: http://www.unicyclist.com/profile/9503
View this thread: http://www.unicyclist.com/thread/39693

one of my friends has a kenda kolassol on his torker dx 24 so i know
that will work how ever wide that is.

--
weissnp - I know nothing!
------------------------------------------------------------------------
weissnp's Profile: http://www.unicyclist.com/profile/9347
View this thread: http://www.unicyclist.com/thread/39693

I put a Kenda Kolossal on my Torker DX and it fits just fine. FYI I was
screwing around with a friends uni and his Gazz fit in my frame perfect,
no rubbing, it was pretty (expletive deleted) close though, but it
worked

--
The Yang - Unicyclist with Balls

"I just rolled over my testicle" Tony J

------------------------------------------------------------------------
The Yang's Profile: http://www.unicyclist.com/profile/9517
View this thread: http://www.unicyclist.com/thread/39693

I have a 24" Torker LX and it fits a 2.3" Kenda K Rad quite easily. The
K Rad is more of a BMX dirt type tire than a real MTB tire, but if you
consider the larger volume to be a fair trade for the less agrressive
tread, it is worth looking at.

--
jiheison
------------------------------------------------------------------------
jiheison's Profile: http://www.unicyclist.com/profile/9677
View this thread: http://www.unicyclist.com/thread/39693

If you have a new torker, you should be able to fit a gazz in it. I saw
one at moab, anyway.

--
Fuego - Unicycle Ninja

"Unicycling is more about the center of concentration than the center of
balance."

'OneWheelNinjaSquad' (http://gallery.unicyclist.com/OneWheelNinjaSquad)
------------------------------------------------------------------------
Fuego's Profile: http://www.unicyclist.com/profile/6983
View this thread: http://www.unicyclist.com/thread/39693

Fuego said:

*If you have a new torker, you should be able to fit a gazz in it. I
saw one at moab, anyway. *

Thats for a DX torker,like i have.He proballay has an lx or cx.

--
forrestunifreak - Team YAMS member

Old school,new school,dont go to school.
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/39693

forrestunifreak said:

*Thats for a DX torker,like i have.He proballay has an lx or cx. *

oh, I didnt' know it was only DX... I thought all the frames were the
same.

I need to try some tires in my freinds dx.

--
Fuego - Unicycle Ninja

"Unicycling is more about the center of concentration than the center of
balance."

'OneWheelNinjaSquad' (http://gallery.unicyclist.com/OneWheelNinjaSquad)
------------------------------------------------------------------------
Fuego's Profile: http://www.unicyclist.com/profile/6983
View this thread: http://www.unicyclist.com/thread/39693