Greetings! I noticed a squeak from my right Campy Profit Plus Record pedal earlier in the week. I know one pulls the body off by turning the wrench CW (left-handed threading). NOW, when confronting the stuff on the pedal axle:
1. I can find no exploded view of the innards. What exatly is there? It looks like 3 rather small cartdridge units...
2. Is the nut inside LH or RH threaded? It's on there pretty tight, and I don't want to mess things up forcing the nut the wrong way.
Greetings! I noticed a squeak from my right Campy Profit Plus Record pedal earlier in the week. I know one pulls the body off by turning the wrench CW (left-handed threading). NOW, when confronting the stuff on the pedal axle:
Not an exploded view at all (except for the clip mechanism). I've seen more than that in my hands... (This is why the original posting - I went to the Campy site first and found only this picture, which is also on the insert.)
Thanks anyway...
Mark Janeba said:
richard said:
Greetings! I noticed a squeak from my right Campy Profit Plus Record pedal earlier in the week. I know one pulls the body off by turning the wrench CW (left-handed threading). NOW, when confronting the stuff on the pedal axle:
No, I'm not sure it's not from the cleat, so I've lubed that as well. There is also a rubber seal where the axle enters the body. Those have been known to squeak in some pedals.
Thing is, though, eventually whatever it is in that "cartridge" WILL need cleaning and new grease some day.
Tom Paterson said:
Quoted message said:
From: richard
Quoted message said:
I don't want to mess things up forcing the nut the wrong way.
You sure the sqeak is coming from the pedal bearings, and not the cleat, at the shoe and/or the pedal?
No, I'm not sure it's not from the cleat, so >I've lubed that as well.
I had a grey cleat that wasn't worn (left side, I mount/dismount on the right), was screwed on nice and tight, that squeeked real bad. Put a new one on: silence, no pedal lubing or anything.
Agreed, someday the pedal guts may need work, but it might not be now. I muddled through a bearing repack on a pair of Chorus Profits a year or so ago, nothing weird but details (sorry) are fuzzy. --TP