Cycling Equipment · Public discussion

Chainring wear.

Started by Callistus Valerius · · Last activity · 8 posts · 397 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
11 August 2004
Last activity
12 August 2004
Original author
Callistus Valerius
Posts
8
Discussion status
Public discussion
Total views
397
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–8 of 8
Posts remain in their original chronological order.

Text size
  1. I notice when I'm only on the big ring, and I'm pushing a big gear, I feel
    an occasional clicking in my feet thru the pedals. I don't think it's the
    bottom bracket, it's not loose, and it only happens with the big ring.
    Visual inspection shows some wear, but is it possible the chain would move
    on the ring, and would cause that clicking feeling in the pedal.

  2. "Callistus Valerius" wrote🙁click) is it possible the chain would move on
    the ring, and would cause that clicking feeling in the pedal.
    ^^^^^^^^^^^^
    Have you installed a new chain recently? Since you say you have visible
    wear on the chainring, you would have a chain with shorter pitch than the
    ring. This could possibly cause the chain to climb up on a tooth
    occasionally, and then drop into place. (Just a guess.)

  3. I have seen a similar problem in some Shimano splined road cranks, resulting
    in a clicking feeling through the pedal. Try tightening the crank arms (are
    you using self extractor bolts?), or greasing them and then re-tightening.
    If that solves it, then use thread lock to keep it tight.Of course, worn
    pedal bearings sometimes cause a similar problem, especially if the pedal
    axle has taken a ding and is slightly bent.
    Blake

    "Callistus Valerius" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I notice when I'm only on the big ring, and I'm pushing a big gear, I feel
    an occasional clicking in my feet thru the pedals. I don't think it's the
    bottom bracket, it's not loose, and it only happens with the big ring.
    Visual inspection shows some wear, but is it possible the chain would move
    on the ring, and would cause that clicking feeling in the pedal.

  4. Callistus Valerius said:

    I notice when I'm only on the big ring, and I'm pushing a big gear, I
    feel an occasional clicking in my feet thru the pedals. I don't
    think it's the bottom bracket, it's not loose, and it only happens
    with the big ring. Visual inspection shows some wear, but is it
    possible the chain would move on the ring, and would cause that
    clicking feeling in the pedal.

    Is the click always at the same pedal position?

    It could be the cranks/chainwheel striking the front derailler, or
    possibly chain rub, or maybe derailler misalignment that's causing the
    chain to try and shift.

  5. Jacobe Hazzard said:
    Callistus Valerius said:

    I notice when I'm only on the big ring, and I'm pushing a big gear, I
    feel an occasional clicking in my feet thru the pedals. I don't
    think it's the bottom bracket, it's not loose, and it only happens
    with the big ring. Visual inspection shows some wear, but is it
    possible the chain would move on the ring, and would cause that
    clicking feeling in the pedal.

    Is the click always at the same pedal position?

    It could be the cranks/chainwheel striking the front derailler, or
    possibly chain rub, or maybe derailler misalignment that's causing the
    chain to try and shift.

    Another thought: derailer misalignment could be caused/exacerbated by the
    frame flexing, allowing cables to move.

  6. In article <[email hidden]>,
    [email hidden] says...

    Quoted message said:

    I notice when I'm only on the big ring, and I'm pushing a big gear, I feel
    an occasional clicking in my feet thru the pedals. I don't think it's the
    bottom bracket, it's not loose, and it only happens with the big ring.
    Visual inspection shows some wear, but is it possible the chain would move
    on the ring, and would cause that clicking feeling in the pedal.

    check the pedal bearings and the BB bearings. Also give the cranks a
    thorough check.
    -------------
    Alex

  7. Callistus Valerius said:

    I notice when I'm only on the big ring, and I'm pushing a big gear,
    I feel an occasional clicking in my feet thru the pedals. I don't
    think it's the bottom bracket, it's not loose, and it only happens
    with the big ring. Visual inspection shows some wear, but is it
    possible the chain would move on the ring, and would cause that
    clicking feeling in the pedal.

    Chains don't make clicking feelings in pedals although a tight link,
    typically one which has been reconnected by pressing in a pin, can
    cause a dull click when rolling around the derailleur idlers (a rapid
    back and front bending being required). Other than that, a chain
    often skips with a sharp crack as it skips over a tooth under load.
    This is caused by pitch wear at a rear sprocket and can best be fixed
    by replacing the sprocket with a new one.

    From your description, the effect is not from chain replacement. What
    else did you do when you replaced the chain and are you sure this
    never occurred before?

    Jobst Brandt
    [email hidden]

  8. Callistus Valerius wrote in message ...

    Quoted message said:

    I notice when I'm only on the big ring, and I'm pushing a big gear, I feel
    an occasional clicking in my feet thru the pedals. I don't think it's the
    bottom bracket, it's not loose, and it only happens with the big ring.
    Visual inspection shows some wear, but is it possible the chain would move
    on the ring, and would cause that clicking feeling in the pedal.


    The clicking can originate from the freewheel, specially when using the
    outermost sprocket. If there is obvious play in the freewheel bearings, try
    swapping for one without.

    Trevor

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.