I wouldn't have thought that munis would necessarily be stronger, what
makes you think this? All the top end hub and crank sets are made to fit
either muni or trials unicycle. Same with frames.
As everything is bigger on a muni I would say they'd be easier to break
than on a trials- longer cranks have more leverage put on them, larger
diameter wheels (24"/26" etc) would surely be narrower in comparison to
a smaller wheel (19"/20"😉 on the same size hub, so easier to taco.
24" frame legs would have more twisting pressure applied to them and
possibly take the stress worse than the 20" equivalent.
The saddles are generally the same, only really the padding would vary
between the two styles of riding.
Of course I'm no expert on this, so if anybody disproves the above then
just ignore me! 🙂
A muni can be used for trials, a trials can be used for freestyle, a
freestyle can be used for the road and a 29er can be used for muni- they
just aren't designed to do the job as well as other unicycles. Not that
this stops some people. I'm sure a mountain bike can be used for bike
trials, but it just wouldn't be as good aas a trials bicycle.
Trials unicycles have the weight advantage over munis as previously
mentioned and also have the upper hand in manoeuvrability. I *think* you
can accelerate quicker on a 20" with 140mm cranks than most munis too,
though again, I could be wrong.
If you only have one or only want to get one, just figure out what type
of riding you're most likely to do and get the appropriate unicycle.
Like I said a muni can do trials and similarly a trials can do muni!
Hope this is of some use 🙂
--
one wheeled stallion - Guerilla Unicyclist
OWS
"...there's nothing I can't manage if I grunt loudly enough" -Mikefule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/33057