Well, a few days back I was riding my 26" uni that I got off of
unicycle.com (it was the one that was $66 because they were clearing
them out or something) broke. I don't know how it happened, but the
part of the frame that attatches to the lollipops -split- up the middle
of the forks for about 3 inches! Well, I really liked this uni, so I
figured out a way to fix it. What I came up was as follows:
*Bend the bottom of the forks back into shape so it fits snugly over the
lollipop.
*Next, cut a 3 inch piece of 1 inch tubing to go around the broken seam
(angle it at the top)
*Tack weld the pipe to the frame in the front and back (providing they
are both steel. If its steel and aluminium, its done. Steel and
aluminium don't weld together.)
*Drill out new holes in the pipe so you can bolt the frame to the
wheel
*Put it a set of 8-point safety wire bolts in place of the old bolts
There was really no reason to use safety bolts, I just thought they
looked cool!
Doing this to the 26 not only fixed it, but strengthened and stabilized
the ride. It may not look super flashy, but its a very good ride
compared to what it was. Just thought you guys might find it a cool fix.
+----------------------------------------------------------------+
| Attachment filename: dscf0002.jpg |
|Download attachment: http://www.unicyclist.com/attachment/209475|
+----------------------------------------------------------------+
--
digitalattrition - Addicted to Crank (mounts)
"can you do a wheelie on that?!"
--Some kid I saw when I was riding
------------------------------------------------------------------------
digitalattrition's Profile: http://www.unicyclist.com/profile/6430
View this thread: http://www.unicyclist.com/thread/32417