Custom...

In most cases it's the cranks I think the problem is that all of the
shorter cranks that are available are realy made for little kids bikes
the one exception is the monty cranks which were not available at the
time I was trying to find something that wouldn't bend on the first two
foot drop, unless you only weigh a hundred pounds or less I would go
ahead and try to buy an onza or a chris holm or try to find a sumit
used. I ended up upgrading to a profile hub wheelset which costs more
than a complete onza or a chris holm, and if you buy the chris holm from
the start you get a better frame as well.

--
Tellurider - Dan Wilson
------------------------------------------------------------------------
Tellurider's Profile: http://www.unicyclist.com/profile/4972
View this thread: http://www.unicyclist.com/thread/32131

Thanks. I hadn't realised hub and cranks were so expensive. I think i
should go with the onza, of course I said that a month ago. Any
objections from anyone else, speak now or forever hold your peace.

David

Ps. you can speak later if you want.

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

If you have the cash go for either the KH or Onza straight off, but
ifyou're not sure about getting into trials etc, go for the Nimbus. I
had one and it served me well. I ended up upgrading to an Onza hub/crank
set. It's easy to upgrade and the parts like the seat and frame etc
should last you.

Hope this has helped.

--
one wheeled stallion - Guerilla Unicyclist

OWS
"It's all in the mind, not the behind" -MikeFule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/32131

How much did the onza wheel set cost you?

David

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

darchibald said:

*At the Bedford site it says, a set would be about $525, is this
true?*

I would talk to Darren directly about the price. It's probably less
than what he has listed on his site. At least that was the case when I
got my KH hub and cranks from him.

--
toddw9 - Doh!!!

Fat people are hard to kidnap.
------------------------------------------------------------------------
toddw9's Profile: http://www.unicyclist.com/profile/4466
View this thread: http://www.unicyclist.com/thread/32131

I just bought the hub and cranks from unicycle.uk.com for... £120 I
think and replaced my old hub, so I have the same rim. 'My unis'
(http://gallery.unicyclist.com/albuw11) Hopefully this'll work... if not
then I give up! Take a look at the trials uni there.

--
one wheeled stallion - Guerilla Unicyclist

OWS
"It's all in the mind, not the behind" -MikeFule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/32131

It's not that much for most hubs and cranks, although profiles are
probably about that. You can get a Kris Holm hub and crank set in the US
for about $200, I think. If you go with the nimbus trials the cranks
will probably break first, and they can be replaced for a tenner for
cheap steel ones or $20 - $30 for better alloy ones, although alloy
cranks snap rather than bend so aren't good if you do big drops.
It'll probably be cheaper in the long run to get a splined set up,
either KH or onza, but the nimbus can take a bit of punishemt if you're
not sure you want to spend huge amounts now.
The seat is fine too, I woulnd't bother changing that unless you're
feeling rich and want a carbon fibre base.

John

--
johnhimsworth - Falling off with style...

What if the hokey cokey really is what it's all about?
------------------------------------------------------------------------
johnhimsworth's Profile: http://www.unicyclist.com/profile/1788
View this thread: http://www.unicyclist.com/thread/32131

How much abuse can the Nimbus take? Approximately how high can you
really go? Also does this look like a good wheel set (on the top):

http://tinyurl.com/2evwm

I'd have to ask if they had a 36er, and it kinda looks like it has the
nub problem, but other than that I think it looks okay. The price is
right. Tell me what you think.

David

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

The Qu-Ax only comes in 48-hole, so you'll need a 48-hole although I
think it's possible to have a 48-hole hub on a 36-hole rim, if someone
knows how to built the wheel that way. Don't know much about it tho, or
if it has any major pros or cons. Cheap tho, and I've heard they are
strong. I think the Nimbus is good for learning hopping ON to things,
not off them. After all, there's no point learning to drop of big things
ifyou can't get up there, which is what trials is all about. However if
you're in it to drop of huge things, save up for a splined hub/crank set
from the get go. Personally, I think it's preferable to learn to do
smaller drops really well on a cheaper hub/crank set, before trashing a
splined crankset, which you will do if you're going big, unless you're
really light or can drop really well. Others may disagree.

What a babble. If you can make head or tail out of that I'll be
surprised!

--
one wheeled stallion - Guerilla Unicyclist

OWS

"It's all in the mind, not the behind" -Mikefule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/32131

I'm still relatively new to this trials thing (but sure I was going to
do it) and was thinking Nimbus then upgrade later. Originally I was
thinking Onza but ruled that out because of money. But i just found out
today that i might be getting a job so the onza is back on the menu. It
also depends what Bedford will be selling the Kh for since he (like me)
is canadian.

David

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

Another option is to get the Torker DX just for the hub and cranks and
get a Nimbus frame. The Torker comes with a splined hub and crank set
and costs under 200 usd.

One note on cranks:
I feel that it is much better to get cheap(ish) cranks and have them be
the weak point in the system. Although hubs are cheap, the cost of
building a wheel (if you don't do it yourself) is not. I would much
rather replace a crank then a hub.

Daniel

--
daino149 - How's it going, Texas?

there ain't enough body armor in the country for me to try that. -- Ken
on the mtbr forum in reference to MUni
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/32131

Whats wrong with the DX frame?

--
Unicyclefreak
------------------------------------------------------------------------
Unicyclefreak's Profile: http://www.unicyclist.com/profile/6390
View this thread: http://www.unicyclist.com/thread/32131

The torker idea is a good one. I just have to know the size of the hub,
like exact specs. I'd be looking at:

Nimbus II Frame
Torker DX Seat Post/Seat
Torxer DX hub/cranks/pedals
Alex DX32 Tire
Luna Trials tire

Anyone have any suggestions/improvements? Again, the most important
thing would be to get the proper hub measurements, that way i'll know
what spokes to get and whether or not they'll fit the rim. this will be
my first custom job so if I'm missing anything please inform NOW. Thanks
for your help. All replies appreciated.

David

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

I just realised the Torker is 48 spokes. Whats a 48 spoke alternative to
the Alex rim?

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

AS some one stated, and I repeated in my PM to you, you can lace a 48
hole hub to a 36 hole rim. Just don't ask me how, cause I konw about
nothing of wheel building.

Daniel

--
daino149 - How's it going, Texas?

there ain't enough body armor in the country for me to try that. -- Ken
on the mtbr forum in reference to MUni
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/32131

Opps, hit the quote button instead of the edit.

Anyway,
To answer the question of what's wrong with the DX frame. Nothing is
wrong with it. The problem with it is that it's too narrow for trials.
It won't fit wide trials tires.

I think if Torker were to put a wider frame and a 19 inch rim on their
DX line, they would corner the low cost trials market.

Daniel

--
daino149 - How's it going, Texas?

there ain't enough body armor in the country for me to try that. -- Ken
on the mtbr forum in reference to MUni
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/32131

Dunno how cheap that Torker trials wouldbe, but I know Qu-Ax do really
cheap trials and muni with splined hub/crank sets.

--
one wheeled stallion - Guerilla Unicyclist

OWS

"It's all in the mind, not the behind" -Mikefule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/32131

Where can you buy the cheap QU-AX? I thought I found one for a little
more than $400 (my money), which is still more then the onza or the KH.
I'll look some more though.

David

--
darchibald - Unofficial level 3.8
------------------------------------------------------------------------
darchibald's Profile: http://www.unicyclist.com/profile/6240
View this thread: http://www.unicyclist.com/thread/32131

Qu-Ax unis from 'municycle.com' (http://www.municycle.com/) in Germany,
Roland is super cool, so ask him any questions you have.

--
one wheeled stallion - Guerilla Unicyclist

OWS

"It's all in the mind, not the behind" -Mikefule
------------------------------------------------------------------------
one wheeled stallion's Profile: http://www.unicyclist.com/profile/4832
View this thread: http://www.unicyclist.com/thread/32131