Cycling Equipment · Public discussion

The difference 1 Bar makes!!!

Started by Mark · · Last activity · 7 posts · 278 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
2 July 2004
Last activity
4 July 2004
Original author
Mark
Posts
7
Discussion status
Public discussion
Total views
278
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. Been running my new Vittoria 700x23 Open Corsa CX Tires the last
    couple of weeks at 7 Bar (100psi) I thought these seemed hard
    (Ridewise), but decided for the heck of it, to up the poundage to 8
    Bar (115psi) Man, what a difference!

    While most of my roads are on the horrible side around here anyway,
    and I was worried about a much harder ride, I didn't really notice too
    much difference in ride quality, but I sure did notice a difference as
    far as rolling resistance was concerned. It certainly seemed to take
    less effort to pedal, and keep a good pace with the higher inflation
    pressures.

    I don't think I'll be going back to a lower setting! May try 120psi
    next just for the heck of it? Mark

  2. Mark A Poman said:

    Been running my new Vittoria 700x23 Open Corsa CX Tires the last
    couple of weeks at 7 Bar (100psi) I thought these seemed hard
    (Ridewise), but decided for the heck of it, to up the poundage to 8
    Bar (115psi) Man, what a difference!

    OK. I'll bite. What is the difference and what is the benefit?

    Quoted message said:

    While most of my roads are on the horrible side around here anyway,
    and I was worried about a much harder ride, I didn't really notice
    too much difference in ride quality, but I sure did notice a
    difference as far as rolling resistance was concerned. It certainly
    seemed to take less effort to pedal, and keep a good pace with the
    higher inflation pressures.

    Are you sure you weren't experiencing a psychosomatic response? If
    you look at RR graphs at:

    http://www.terrymorse.com/bike/imgs/rolres.gif

    You'll see that differences in RR are minuscule at those pressures.

    Quoted message said:

    I don't think I'll be going back to a lower setting! May try 120psi
    next just for the heck of it?

    I think you are also overlooking cornering, for which the contact
    patch has become smaller and compliance of the tire to road texture
    has become worse.

    Jobst Brandt
    [email hidden]

  3. Hello Jobst, Thank you for your reply.

    Honestly, there was a slight difference I could feel, and seemed that
    acceleration/coming up to cruising speed was also a bit easier with
    the higher (8 Bar )pressures.

    Maybe you are right in a sense about imagining this quality, as every
    time I ride, I see to be improving all the time, so perhaps each time
    I ride, I am becoming stronger, and stronger, and this makes it feel
    like it's easier to pedal? lol This might be a more real explanation?,
    I don't know?

    Since recommended inflation pressures are 7-9 Bar for this tire, I
    figured why am I running at the low end, and wanted to try a bit more
    pressure.

    Will Tire adhesion be necessarily worse increasing pressure by 1 Bar
    with this particular tire? Thank you again Jobst, Mark D.

    [email hidden] wrote in message news:<[email hidden]>...

    Quoted message said:
    Mark A Poman said:

    Been running my new Vittoria 700x23 Open Corsa CX Tires the last
    couple of weeks at 7 Bar (100psi) I thought these seemed hard
    (Ridewise), but decided for the heck of it, to up the poundage to 8
    Bar (115psi) Man, what a difference!

    OK. I'll bite. What is the difference and what is the benefit?

    Quoted message said:

    While most of my roads are on the horrible side around here anyway,
    and I was worried about a much harder ride, I didn't really notice
    too much difference in ride quality, but I sure did notice a
    difference as far as rolling resistance was concerned. It certainly
    seemed to take less effort to pedal, and keep a good pace with the
    higher inflation pressures.

    Are you sure you weren't experiencing a psychosomatic response? If
    you look at RR graphs at:

    http://www.terrymorse.com/bike/imgs/rolres.gif

    You'll see that differences in RR are minuscule at those pressures.

    Quoted message said:

    I don't think I'll be going back to a lower setting! May try 120psi
    next just for the heck of it?

    I think you are also overlooking cornering, for which the contact
    patch has become smaller and compliance of the tire to road texture
    has become worse.

    Jobst Brandt
    [email hidden]

  4. Mark D Poman said:

    Since recommended inflation pressures are 7-9 Bar for this tire, I
    figured why am I running at the low end, and wanted to try a bit
    more pressure.

    Quoted message said:

    Will Tire adhesion be necessarily worse increasing pressure by 1 Bar
    with this particular tire?

    Unless you are one to corner, leaned over more than 40 degrees, I
    don't think you'll find any change. 23mm tires aren't any good for
    cornering anyway. They are too narrow to bridge bad traction spots
    and too hard to have a sufficiently large contact patch.

    Jobst Brandt
    [email hidden]

  5. Jobst, Just thinking some more about this, I was experiencing a
    pressure gauge problem over the past couple weeks, and this may also
    have influenced a possible erroneous reading previously?

    I have not have been a 7 Bar before, and so, there may be the
    possibility that I have gone to an increase greater than 1 Bar?

    Just rode 20mi earlier with the tires at 120psi, and they performed
    just fine.

    Mark

    [email hidden] (Mark) wrote in message news:<[email hidden]>...

    Quoted message said:

    Been running my new Vittoria 700x23 Open Corsa CX Tires the last
    couple of weeks at 7 Bar (100psi) I thought these seemed hard
    (Ridewise), but decided for the heck of it, to up the poundage to 8
    Bar (115psi) Man, what a difference!

    While most of my roads are on the horrible side around here anyway,
    and I was worried about a much harder ride, I didn't really notice too
    much difference in ride quality, but I sure did notice a difference as
    far as rolling resistance was concerned. It certainly seemed to take
    less effort to pedal, and keep a good pace with the higher inflation
    pressures.

    I don't think I'll be going back to a lower setting! May try 120psi
    next just for the heck of it? Mark

  6. (Mark) said:

    Maybe you are right in a sense about imagining this quality, as every

    BTW, if you're not sure if it's your imagination that the rolling
    resistance is better, and it helps you enjoy your riding more, then
    who cares whether it's real or imagined?
    --
    Rick Onanian

  7. Mark said:

    Been running my new Vittoria 700x23 Open Corsa CX Tires the last
    couple of weeks at 7 Bar (100psi) I thought these seemed hard
    (Ridewise), but decided for the heck of it, to up the poundage to 8
    Bar (115psi) Man, what a difference!

    Agreed. I find CX's sluggish at 7 bar. I have the front at 7.5 to 8, and
    the rear at just over 8.5.

    ~PB

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.