Singlespeed gear "placing" question

basjan said:

I have built up a nice singlespeed with parts laying around. My question is
this: Running a 32x18 gear setup, the 18 rear cog is fairly outward
(towards the quick release nut) on the cassette carrier in order to maintain
a straight chainline. (It now sits about 2-3 regular cogs from the end of
the carrier). Is this kind of leverage OK for the hub, or will it go
bonkers if I push this gear up steep hills etc.?

Not a problem. Just make sure the chainline is as straight as possible.

Sheldon "Couldn't Stand Such A Low Gear" Brown
+-----------------------------------------------------+
| Always be sincere, even when you don't mean it. |
| --Irene Peter |
+-----------------------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

basjan said:

I have built up a nice singlespeed with parts laying around. My question is
this: Running a 32x18 gear setup, the 18 rear cog is fairly outward
(towards the quick release nut) on the cassette carrier in order to maintain
a straight chainline. (It now sits about 2-3 regular cogs from the end of
the carrier). Is this kind of leverage OK for the hub, or will it go
bonkers if I push this gear up steep hills etc.?

Do you imagine that something bonkers would happen on a derailleur bike if
you climbed a hill in the gear that happened to be at that position? It's
no different with the others not hanging around.

--

David L. Johnson

__o | I don't believe you, you've got the whole damn thing all wrong.
_`\(,_ | He's not the kind you have to wind-up on Sundays. --Ian Anderson
(_)/ (_) |