UK and Europe · Public discussion

Techy Cleaning Technique

Started by Rob Horton · · Last activity · 9 posts · 338 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
11 June 2004
Last activity
12 June 2004
Original author
Rob Horton
Posts
9
Discussion status
Public discussion
Total views
338
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and I
    don't mean something to big to fit in the cleaner🙂 ?

    Cheers

  2. IRTA "tetchy cleaning technique" and had visions of a bad-tempered man with
    a bucket of soapy water...

    --
    Guy
    ===
    May contain traces of irony. Contents liable to settle after posting.
    http://www.chapmancentral.co.uk

    Victory is ours! Down with Eric the Half A Brain!

  3. used one to clean a rear mech. worked well.

    Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and I
    don't mean something to big to fit in the cleaner🙂 ?

    Cheers

  4. Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and
    I don't mean something to big to fit in the cleaner🙂 ?

    I can't see why you wouldn't. OTOH, I can't see why you'd want to clean much
    that way. It'd be pain in the [censored] to take it all off the bike and put it
    back on...

  5. Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and I
    don't mean something to big to fit in the cleaner🙂 ?

    Cheers

    I don't think cartridge bbs would benefit from an ultrasonic cleaning.
    Why not just soap and water (or similar) like everyone else! 😉

  6. Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;

    Before the clarificatio i was getting a little worried!

    Quoted message said:

    chain, derailleurs etc.?

  7. Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and I
    don't mean something to big to fit in the cleaner🙂 ?

    Cheers

    Cleaned chains that way but it worked so-so.

    Tony

  8. a lot depends on the solvent you use in the cleaner, as not all give the
    best cavitationto aid the cleaning process

    Tony Raven said:
    Rob Horton said:

    Hi,
    has anyone used an ultrasonic cleaner to clean bits on their bike;
    chain, derailleurs etc.? Is there anything that can't be cleaned, and I
    don't mean something to big to fit in the cleaner🙂 ?

    Cheers

    Cleaned chains that way but it worked so-so.

    Tony

  9. Pete whelan said:

    a lot depends on the solvent you use in the cleaner, as not all give the
    best cavitationto aid the cleaning process

    I used the proper degreasing solvent for ultrasonic cleaning, still didn't do
    much of a job.

    Tony

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.