The Dubliner said:On asking advice of an old sage about her first attempt at an ITT, my partern was told 'go out hard', settle in faster, and finish even faster still'.
But what about a TTT?
A group of 4 of us who regularly race criteriums at club level have entered our first TTT event. What advice would you give us in establishing the order of riders, how long should we be pulling turns etc.
I would say it is the NSW club TTT championship at Calga in August, correct?
This is not a flat course. It is undulating, hilly in parts and the only close to flat section is near the finish.
You are going to have to sort out amongst yourselves -
1. Who are the three strongest (time taken off 3rd rider) and to quickly decide at what point of the trial should you wait or proceed on relating to a dropped rider. The question you must ask yourselves at that point in the race "will we benefit as a team in time to have that fourth rider with us or can the three remaining not lose time." It is usually preferable to wait for a dropped rider early in the race (but dependent upon that rider's ability) and not wait towards the later stages.
2. The length of turns on front. We run 200-300 metres but if that exceeds a rider's capability at that pace then that rider should opt for a quicker change.
3. On the two hills (Peats Ridge 1.2km & "Blood" Hill .8km but steepening) which rider is going to set the pace. There should be no changing of turns on hills.
Communicate amongst each other, try to keep tight and only accelerate gently, particularly over crests of hills. If gaps form then the fluency is lost and riders expend a lot of effort, that should be applied when doing a turn, bridging small gaps.
A lot of TTT groups lose time over the difficult Calga course because they are constantly reforming after riders get gapped. It is ideal do establish a common speed that keeps all riders together. A team of riders of equal ability can usually produce a time better than teams that have a combination of mismatched riders that appear stronger on paper.