Going clipless

cc said:

I've a friend who really likes eggbeaters . . my only
concern with these is that I'm not certain that it's possible to get a
clip/platform combo for the RH or SJ (if I decide I want one), or if anyone
uses these for road bikes.

Suggestions?

The Eggbeaters also come in the Candy and Mallet forms, which are basic
Eggbeaters with (different-sized) platforms round them.

--
a.m-b FAQ: http://www.j-harris.net/bike/ambfaq.htm

a.bmx FAQ: http://www.t-online.de/~jharris/bmx_faq.htm

bomba <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

cc said:

I've a friend who really likes eggbeaters . . my only
concern with these is that I'm not certain that it's possible to get a
clip/platform combo for the RH or SJ (if I decide I want one), or if anyone
uses these for road bikes.

Suggestions?

The Eggbeaters also come in the Candy and Mallet forms, which are basic
Eggbeaters with (different-sized) platforms round them.

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)
--
Jonesy

-----BEGIN PGP SIGNED MESSAGE-----

In article said:

Hey all,

I'm looking at picking up new road and XC bikes in the next six months, and
am trying to decide on the best pedal / cleat system, ideally such that I
don't need two pairs of shoes.

I haven't decided exactly what road I'll pick up, something in the just sub
1K range, but I'm almost certain that I'll get a Stumpie elite disc in the
next few weeks. I've a friend who really likes eggbeaters . . my only
concern with these is that I'm not certain that it's possible to get a
clip/platform combo for the RH or SJ (if I decide I want one), or if anyone
uses these for road bikes.

_ Eggbeaters make great road pedals. The most recent US pro
cycling champion uses them.

http://www.cyclingnews.com/tech.php?id=road/2004/giro04/tech/bikes_climbing

As long as you use a reasonably stiff shoe they are
fine on the road. For mountain biking I would look at
either the Candy or Mallet, depending on how much you
want to ride unclipped.

_ Booker C. Bense

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQMXZlGTWTAjn5N/lAQGiwQQArMdeLKDPrxettFn2+BCSWA2M+MB9nFoU
rpmdWaV4qo9aPNKjXiB7BQcNZDly1B751+fr/C8uxu0CxovWsgmfyBhucAK3LEYP
JqfMTBt+lnR3nN7H3YgyLYFSEQX0x2IFBaAcYLWY4AS6wiowmP1S7/k5XFBp+LH3
uKnuGDbloyA=
=d20D
-----END PGP SIGNATURE-----

Quoted message said:

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)

I just got my woman some Mallet Cs.

She was having a rough time getting used to clipless (Times), so I got her
these so she can wear regular shoes on technical rides. She is a LOT
happier with having a choice but is having a difficult time clipping in and
out reliably. The cleats are nice and tight, and she had no problems with
the Times (except for *having* to use them).

How long did you find they needed to "break in"?

On 2004-06-08, John Harlow penned:

Quoted message said:

I just got my woman some Mallet Cs.

I could have sworn slavery was illegal ...

--
monique

Quoted message said:

I could have sworn slavery was illegal ...

--
monique

Well, you know what they say: what you do in your own home . . .

****cc

Quoted message said:

Quoted message said:

The Eggbeaters also come in the Candy and Mallet forms, which are basic
Eggbeaters with (different-sized) platforms round them.

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)
--

So you can feel them if you're wearing thinner shoes, or those with softer
soles?

***cc

-----BEGIN PGP SIGNED MESSAGE-----

In article <[email hidden]>,

John Harlow said:

Quoted message said:

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)

I just got my woman some Mallet Cs.

She was having a rough time getting used to clipless (Times), so I got her
these so she can wear regular shoes on technical rides. She is a LOT
happier with having a choice but is having a difficult time clipping in and
out reliably. The cleats are nice and tight, and she had no problems with
the Times (except for *having* to use them).

How long did you find they needed to "break in"?

_ Mine took about 10 or so rides. I have two pairs of MTB shoes
and eggbeaters seem pretty sensitive to the tread depth. My older worn
shoes are much easier to clip in/out than the newer ones. Have
you tried using the little shim for under the cleat?

_ Another thing to try is lubing the coil springs on the outside
of the pedal. I'm not sure if that's really needed or not, but
it seemed to help. You can make the cleats much easier to pop
in/out by a little "simulated wear" a file, but that will reduce
the life of the cleats. When new you can only get out by
twisting, but after some wear you can pull them straight out
like you can with very loosely set SPD's.

_ Booker C. Bense

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQMZB1mTWTAjn5N/lAQHz6gQAtGTV2QIBicMvPnL03MdIkieLri+T1mW8
S4tJgl5D9q74oo6hwYLD5paXhnrn0Ec5OCMMvIg4+8AlgM1EC0TtBZZg9S5J5PA6
hnk64XBBSbDhNtFzuxclMLml348XXXyDLRSlIVC2kpIedTrvH24A73NGe3bAxhh8
lvS0lgDD8uY=
=9SVy
-----END PGP SIGNATURE-----

cc said:

Hey all,

Hey back

[snip]

By all means go clipless. Currently there are tons of hyped up
clipless systems. My advice is to keep it as simple as possible.
SPD's work absolutely fine and you can get a pair of simple shimano's
that will do the trick for less than $70 bucks not including shoes.

Do some research and keep it simple.

Peace,
Bill

The mind serves properly as a window glass rather
than as a reflector, that is, the mind should give
an immediate view instead of an interpretation of the world.
:-]

"cc" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Quoted message said:

Quoted message said:

The Eggbeaters also come in the Candy and Mallet forms, which are basic
Eggbeaters with (different-sized) platforms round them.

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)
--

So you can feel them if you're wearing thinner shoes, or those with softer
soles?

The Eggbeater clips stick up off the platforms. If I'm wearing lugged
hiking shoes, I can't tell they're there. If I'm wearing my
All-Stars, I can tell they're there. I wouldn't want to pedal all day
in the All-Stars. But they do work for quick in-town trips. Even for
dragging a kid in a bike trailer down the paved bike trail.

Regular tennis shoes? I really don't notice the Eggbeater part.
There's plenty of platform to hold up your feet.
--
Jonesy

"John Harlow" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Quoted message said:

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)

I just got my woman some Mallet Cs.

She was having a rough time getting used to clipless (Times), so I got her
these so she can wear regular shoes on technical rides. She is a LOT
happier with having a choice but is having a difficult time clipping in and
out reliably. The cleats are nice and tight, and she had no problems with
the Times (except for *having* to use them).

How long did you find they needed to "break in"?

Well, that's kind of a funny story. I had SPDs to start with,
adjusted so loose that I could just yank out. But I still fell over a
lot, because I forgot I had clipped in. Or I'd get clipped in without
realizing it. So, I went with the Mallets to go platform for a while
until I could get some shoes that didn't squeeze the life out of my
feet. (What's with those Italians and their narrow-ass feet?) After I
got some wide shoes, I went onto the lawn, and practiced clipping in
and out. I also lubed the spring, and PAMmed my cleats. After about
50-100 engagement-disengagement cycles, the system finally started to
feel good. Now, is that because I taught myself what to do, or is
that because the mechanism loosened up a little? I'm guessing both.

Take your wife to a park with a bike stretch of grass. Tell her to
get into and out of the pedals a bunch of times, so it becomes a
natural motion. Heck, even when I'm in my hiking boots, I still
rotate my heel before I step off the pedals!

Good luck to you and her.
--
Jonesy

Booker C. Bense <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Quoted message said:

How long did you find they needed to "break in"?

_ Mine took about 10 or so rides. I have two pairs of MTB shoes
and eggbeaters seem pretty sensitive to the tread depth. My older worn
shoes are much easier to clip in/out than the newer ones. Have
you tried using the little shim for under the cleat?

Hmmm, now I wish I would have tried that. I should install the shim
just for the heck of it, to see if it makes any difference. The lugs
on my shoes still hang up every now and again.
--
Jonesy

Quoted message said:

_ Mine took about 10 or so rides. I have two pairs of MTB shoes
and eggbeaters seem pretty sensitive to the tread depth. My older worn
shoes are much easier to clip in/out than the newer ones. Have
you tried using the little shim for under the cleat?

I actually had to use both sets for her shoes. With them, I can easily clip
them in by hand, and they *just* rest on the flats.

Quoted message said:

_ Another thing to try is lubing the coil springs on the outside
of the pedal. I'm not sure if that's really needed or not, but
it seemed to help. You can make the cleats much easier to pop
in/out by a little "simulated wear" a file, but that will reduce
the life of the cleats. When new you can only get out by
twisting, but after some wear you can pull them straight out
like you can with very loosely set SPD's.

Thanks, underscore Booker. I'll try the lube and tell her, unlike me, they
get better with time (do Times get better with themselves?)

Quoted message said:

Take your wife to a park with a bike stretch of grass. Tell her to
get into and out of the pedals a bunch of times, so it becomes a
natural motion. Heck, even when I'm in my hiking boots, I still
rotate my heel before I step off the pedals!

Will do. I'm sure she will get accustomed to them; it's good to know others
had a bit of an adjustment period as well. Just mentioning this will likely
help a good amount.

Quoted message said:

Good luck to you and her.

Thanks!

Quoted message said:

Quoted message said:

Quoted message said:

> The Eggbeaters also come in the Candy and Mallet forms, which are

basic

Quoted message said:

Quoted message said:

Quoted message said:

> Eggbeaters with (different-sized) platforms round them.

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)
--

So you can feel them if you're wearing thinner shoes, or those with

softer

Quoted message said:

Quoted message said:

soles?

The Eggbeater clips stick up off the platforms. If I'm wearing lugged
hiking shoes, I can't tell they're there. If I'm wearing my
All-Stars, I can tell they're there. I wouldn't want to pedal all day
in the All-Stars. But they do work for quick in-town trips. Even for
dragging a kid in a bike trailer down the paved bike trail.

Regular tennis shoes? I really don't notice the Eggbeater part.
There's plenty of platform to hold up your feet.
--
Jonesy

$$. Thanks.

**cc

I just put Shimano 324's on both my bikes. I'm relatively new to
clipless pedals and they work pretty well. Take a look at the reviews on
mtbr.com.

Steve.

cc said:

Hey all,

I'm looking at picking up new road and XC bikes in the next six months, and
am trying to decide on the best pedal / cleat system, ideally such that I
don't need two pairs of shoes.

My current ride is a well-weathered Rockhopper Pro from a few years back. It
came with clipless - not sure which variety, as they're in storage - but I
threw on platforms. I've always ridden platforms (I'd ridden primarily BMX
before the RH), and did a lot of mixed city/trail rides where they made
sense (before I moved to the Bay Area, where we've trails aplenty within
riding distance).

I haven't decided exactly what road I'll pick up, something in the just sub
1K range, but I'm almost certain that I'll get a Stumpie elite disc in the
next few weeks. I've a friend who really likes eggbeaters . . my only
concern with these is that I'm not certain that it's possible to get a
clip/platform combo for the RH or SJ (if I decide I want one), or if anyone
uses these for road bikes.

Suggestions?

Thanks,
****cc

Jonesy said:

"cc" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

Quoted message said:

>
> The Eggbeaters also come in the Candy and Mallet forms, which are
> basic Eggbeaters with (different-sized) platforms round them.

I got Mallets, and after some time breaking in, they have turned out
to be pretty great clipless, and fairly decent platforms (if you are
wearing shoes that don't have a really thin sole, like flip-flops or
Converse All-Stars.)
--

So you can feel them if you're wearing thinner shoes, or those with
softer soles?

The Eggbeater clips stick up off the platforms. If I'm wearing lugged
hiking shoes, I can't tell they're there. If I'm wearing my
All-Stars, I can tell they're there. I wouldn't want to pedal all day
in the All-Stars. But they do work for quick in-town trips. Even for
dragging a kid in a bike trailer down the paved bike trail.

Regular tennis shoes? I really don't notice the Eggbeater part.
There's plenty of platform to hold up your feet.

One time I drove 45 minutes to a trail and realized I had forgotten my
cycling shoes when I got there. I did the ride in my soft Vans, and by the
end of the ride my arches were aching. Luckily the ride wasn't too
technical, and my friend wasn't very fast.

John M