forks into frame

Matt Paterson says:

Quoted message said:

Quoted message said:

is there anything out there suitable so that i can fit a pair of 1inch
steerer suntour mv600 suspention forks to a saracen dirttrax mtb with a
1-1/8th inch steerer colum.
i was thinking sometning along the lines of a sleeve to increases the
diameter of the fork steerer or do i need to change headset/bearing
cattridges.
many thanks

Punctuation, dude. PUNCTUATION!

Be fair, Matt - there _are_ a couple of full stops in there. Spelling, OTOH...
;-)

Steve

iain said:

is there anything out there suitable so that i can fit a pair of 1inch
steerer suntour mv600 suspention forks to a saracen dirttrax mtb with a
1-1/8th inch steerer colum.
i was thinking sometning along the lines of a sleeve to increases the
diameter of the fork steerer or do i need to change headset/bearing
cattridges.
many thanks

Punctuation, dude. PUNCTUATION!

--
Matt

Fear of a flat planet

iain said:

is there anything out there suitable so that i can fit a pair of 1inch
steerer suntour mv600 suspention forks to a saracen dirttrax mtb with a
1-1/8th inch steerer colum.
i was thinking sometning along the lines of a sleeve to increases the
diameter of the fork steerer or do i need to change headset/bearing
cattridges.
many thanks

Chris King Devolution headsets allow the use of 1" steerers in frames
with a 1-1/8" head tube.

http://www.chrisking.com/headsets/hds_devo.html

- khill