Spring Rates

"T_Blood" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

How do I tell what rate my rear spring is on my Rock Shox Pro Deluxe? It came stock and all I can
find printed on it is the numbers 500 x 2.00. I'm a solid 205 lbs and want to be sure it will
handle me should I get into some hairy [censored].

It's about the frame, more than the shock. Different bikes apply a different amount of leverage to
the shock. As a starting point, see if you can set the sag to the frame manufacturers specs (without
dialing in so much preload that you limit travel). If you can do that the spring should work.

"T_Blood" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

How do I tell what rate my rear spring is on my Rock Shox Pro Deluxe? It came stock and all I can
find printed on it is the numbers 500 x 2.00. I'm

a

Quoted message said:

solid 205 lbs and want to be sure it will handle me should I get into some hairy [censored]. Also, is
there any way to tell what front spring you have in a
Psylo without taking it apart? I know I need the "blue" springs, just not sure which one it came
with. Thx...Mike

The numbers on your rear spring indicate a spring rate of 500lbs/inch with 2 inches of spring
compression. If you find you can't achieve the proper sag or you're bottoming out the bike it's
pretty much trial and error to find the right size. (Note on sag if you put too many turns on the
preload adjuster the spring coils will crash into each other and stuff will break.) I suggest going
in 100lb increments. I believe MRP has a 30 day swap policy to help you find the correct weight
spring. The leverage ratios on different bike makes it hard to calculate the exact size spring.

Mike

If you're planning on visiting Phoenix anytime soon, you'll notice the Summer Rates are a lot lower.
Usually they'll throw in a month or two free.

-John Morgan ...summer looms near.

"Michael Dart" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

"T_Blood" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

How do I tell what rate my rear spring is on my Rock Shox Pro Deluxe? It came stock and all I
can find printed on it is the numbers 500 x 2.00.

I'm

Quoted message said:

a

Quoted message said:

solid 205 lbs and want to be sure it will handle me should I get into

some

Quoted message said:

Quoted message said:

hairy [censored]. Also, is there any way to tell what front spring you have in

a

Quoted message said:

Quoted message said:

Psylo without taking it apart? I know I need the "blue" springs, just

not

Quoted message said:

Quoted message said:

sure which one it came with. Thx...Mike

The numbers on your rear spring indicate a spring rate of 500lbs/inch with

2

Quoted message said:

inches of spring compression. If you find you can't achieve the proper

sag

Quoted message said:

or you're bottoming out the bike it's pretty much trial and error to find the right size. (Note on
sag if you put too many turns on the preload adjuster the spring coils will crash into each other
and stuff will

break.)

Quoted message said:

I suggest going in 100lb increments. I believe MRP has a 30 day swap

policy

Quoted message said:

to help you find the correct weight spring. The leverage ratios on different bike makes it hard to
calculate the exact size spring.

Mike

Try mojo.co.uksprings calc.shtmlOpen ↗ for a good stating point.

Steve E.