carbon fiber bars???

"zzzbh" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some cross
country/freeride type of riding? If they get scratched or nicked, do they
have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

The only bars I've ever seen that have broken have been carbon. You'll
hear lots of excuses about not using old style "sharp edged"XTR
shifters, not overtightening your stem, using bar ends ,how someone
has been using them for years etc etc, but for such a crucial part its
just not worth the risk for the small weight saving/ supposed damping
effect, especially if you weigh over 200lbs.
That goes for posts too.... and cranks.... and frames, in fact
everything except tennis rackets and headset spacers.

cheers

g

No thanks, I have a family that would miss me.

Shaun aRe

"Shaun Rimmer" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

mojo Dee says:

Quoted message said:

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

Family? Or bars?

;-P

"zzzbh" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some

cross

Quoted message said:

country/freeride type of riding? If they get scratched or nicked, do they
have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

I use a set of Easton carbon risers on my hardtail. I've never had a problem
with them, I only use them for XC. If you're planning on doing any jumping
or "freeriding", get something more sturdier made from alu. Carbon bars
aren't meant to take abuse. I saw a DH'r snap his in half on a ride, he was
dumb to put them on his bike in the first place.

- CA-G

Can-Am Girls Kick Ass!

"mojo deluxe" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"Shaun Rimmer" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

Something faulty with the family you got now?

Shaun aRe

"Stephen Baker" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

mojo Dee says:

Quoted message said:

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

Family? Or bars?

;-P

D'oh!

I am a slacker.

Shaun aRe

Carbon no way. But I did snap a motorcycle handlebar.
They were Ape- hangers. And it was done with my bare hands before I
hit the car that pulled out in front of me. That was in 78. The bars
were steel and crome plated. So I would not go carbon anythng.

MTB Ride hard die free.

Shaun R says:

Quoted message said:

D'oh!

I am a slacker.

Heh heh! You're at work - you're supposed to be slacking...

Steve

"gazzer" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"zzzbh" <[email hidden]> wrote in message

news:<[email hidden]>...

Quoted message said:

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some

cross

Quoted message said:

Quoted message said:

country/freeride type of riding? If they get scratched or nicked, do

they

Quoted message said:

Quoted message said:

have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

The only bars I've ever seen that have broken have been carbon. You'll
hear lots of excuses about not using old style "sharp edged"XTR
shifters, not overtightening your stem, using bar ends ,how someone
has been using them for years etc etc, but for such a crucial part its
just not worth the risk for the small weight saving/ supposed damping
effect, especially if you weigh over 200lbs.
That goes for posts too.... and cranks.... and frames, in fact
everything except tennis rackets and headset spacers.

cheers

g

Soooo, I guess my carbon fibre frame and wheels are a big no-no???
Dave ;-)

"zzzbh" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some cross
country/freeride type of riding? If they get scratched or nicked, do they
have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

If you're really hot on having carbon risers, I'll sell you my 1" rise
Answer carbon bars. I have ridden on them very little, only XC, never
been down (bought them Sept. last year.) The ends have not been cut
down (original width.)

Make me a reasonable offer: rfjonesy *at* hotmail *dot* com.

Why would I want to get rid of them? Because someone else wants them,
and because aluminum is a better choice for bike bars. I like the
bars pretty well, but will go with Easton EA 1" risers one way or
another. Get them from me before I put them on eBay.
--
Jonesy

"Stephen Baker" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

mojo Dee says:

Quoted message said:

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

Family? Or bars?

I have an ex wife, so the bars. I've heard too many bad things about the
carbon bars since I bought mine. It takes the fun out of riding, while
preoccupying my mind, wondering if it's going to snap.

"Shaun Rimmer" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"mojo deluxe" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"Shaun Rimmer" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

No thanks, I have a family that would miss me.

I plan on replacing mine.

Something faulty with the family you got now?

Nah, mom & dad are pretty cool. When I read your post, I was thinking
wife/kids.

"zzzbh" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some

cross

Quoted message said:

country/freeride type of riding? If they get scratched or nicked, do they
have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

Thanks for everyone's input. I decided to go with Answer ProTaper Alum.
bars. A couple grams isn't going make much of a difference for me. I
probably saved a couple dollars too.

zzzbh said:

Thanks for everyone's input. I decided to go with Answer ProTaper Alum.
bars. A couple grams isn't going make much of a difference for me. I
probably saved a couple dollars too.

Great choice! That's what I replaced my <cracked> carbon bars with :-)
--
Slacker

mojo deluxe said...

Quoted message said:

I have an ex wife, so the bars. I've heard too many bad things about the
carbon bars since I bought mine. It takes the fun out of riding, while
preoccupying my mind, wondering if it's going to snap.

Tell me what you have and name a price. I'm building up a hardtail so
I'm in the market.

"Stephen Baker" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Shaun R says:

Quoted message said:

D'oh!

I am a slacker.

Heh heh! You're at work - you're supposed to be slacking...

Oh, 'strue, ta!

',;~}~

Shaun aRe

Quoted message said:

Quoted message said:

Thanks for everyone's input. I decided to go with Answer ProTaper Alum.
bars. A couple grams isn't going make much of a difference for me. I
probably saved a couple dollars too.

protapers are mighty fine.

g

"zzzbh" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"zzzbh" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

I'm looking for a good set of riser bars. I only want about a 1" rise.

I never owned carbon fiber bars. Are they strong/stiff enough for some

cross

Quoted message said:

country/freeride type of riding? If they get scratched or nicked, do

they

Quoted message said:

Quoted message said:

have to be replaced? Has anyone ever have them break during normal use?

I'm putting them on a Fisher Cake 2 dlx & I weigh approx. 215 lbs.

TIA, Brian

Thanks for everyone's input. I decided to go with Answer ProTaper Alum.
bars. A couple grams isn't going make much of a difference for me. I
probably saved a couple dollars too.

Welcome to staying with the living ',;~}~

Shaun aRe