Quick release nuts?

"Keven Ruf" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Is there a product that converts a quick release wheel to a track-legal wheel (ie no lever)?

There are products that allow you to replace the QR skewer with a similar diameter rod with
allen key nuts on the ends. However, I don't think you'll get enough gripping force on the rear
wheel of a track bike with these although I suspect you must have a rear track wheel with a
solid axle and nuts?

Cheers,

Scott..

S. Anderson said:

"Keven Ruf" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Is there a product that converts a quick release wheel to a track-legal wheel (ie no lever)?

There are products that allow you to replace the QR skewer with a similar diameter rod with allen
key nuts on the ends. However, I don't think you'll get enough gripping force on the rear wheel
of a track bike with these although I suspect you must have a rear track wheel with a solid axle
and nuts?

Such a "slow-release" works fine on my rear wheel. I may not be Marty Nothstein, but I climb a lot
of hills on my track bike and it does not slip. Of course, QRs also work.

--

David L. Johnson

__o | And what if you track down these men and kill them, what if you _`\(,_ | killed all of us?
From every corner of Europe, hundreds, (_)/ (_) | thousands would rise up to take our places.
Even Nazis can't kill that fast. -- Paul Henreid (Casablanca).

"Keven Ruf" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Is there a product that converts a quick release wheel to a track-legal wheel (ie no lever)?

There are, your LBS should be able to order you a set.

The front works like a champ, the rear isn't the best way to go about making a rear wheel "track
legal." I know several of my trackie teammates that use the bolt-on skewer for their Zipp discs, but
they really have to crank down on the tension to get the rear wheel to stay.

If you have an axle that you can thread for the bolts that the Thule racks use, American Classic
makes some washers that are serrated that work well. I have a Zipp 340/Am Classic hub with their
track axle kit that is great for changing out gears: you only need a 5mm wrench to change gears.

Mike

"David L. Johnson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

On Tue, 08 Apr 2003 19:43:01 +0000, S. Anderson wrote:

Such a "slow-release" works fine on my rear wheel. I may not be Marty Nothstein, but I climb a lot
of hills on my track bike and it does not slip. Of course, QRs also work.

--

David L. Johnson

__o | And what if you track down these men and kill them, what if you _`\(,_ | killed all of
us? From every corner of Europe, hundreds, (_)/ (_) | thousands would rise up to take our
places. Even Nazis can't kill that fast. -- Paul Henreid (Casablanca).

I've seen them work fine on road bikes with horizontal dropouts too, come to think of it. So I take
it back, give'em a shot and they should be fine.

Cheers,

Scott..

In article <[email hidden]>, [email hidden] says...

Quoted message said:

Is there a product that converts a quick release wheel to a track-legal wheel (ie no lever)?

Most QR axles are threade, so you could put the appropriate nuts on the axle. Some that are not
threaded on the outside, such as bullseye, are threaded on the inside so that you could use a small
screw and washer to hold the wheel in place.
-----------------
Alex __O _-\<,_ (_)/ (_)

"Alex Rodriguez" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

In article <[email hidden]>,

[email hidden]

Quoted message said:

says...

Quoted message said:

Is there a product that converts a quick release wheel to a track-legal wheel (ie no lever)?

Most QR axles are threade, so you could put the appropriate nuts on the axle. Some that are not
threaded on the outside, such as bullseye, are threaded on the inside so that you could use a
small screw and washer to hold the wheel in place.

Assuming the axle was long enough to go the whole way through the dropouts and had enough space
outside to put a nut and washer on.