Wiresless conflict?

DD said:

Anyone know if a Polar HRM will interfere with a wireless Shimano Flightdeck?

The HRM is a 510, which may have some unique signal coding, but I am not sure.

Nope. My mate has a flight deck with a polar HRM, (not sure what model though, they are all the
same anyway).
--
Linux Registered User # 302622 <counter.li.orgcounter.li.orgOpen ↗

My interference problems with Polar wireless so far:

S610 and CatEye CordLess2: With both the Polar and the CatEye on the handlebars the speedreading on
the CatEye went everywhere, it was ok with the Polar on the wrist.

S720i and CatEye CordLess2 : CordLess2 was on the bike next to me. The speedreading on the S720i
went to zero. I'm going to try it again with a higher power setting of the speedsensor.

"DD" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Anyone know if a Polar HRM will interfere with a wireless Shimano Flightdeck?

The HRM is a 510, which may have some unique signal coding, but I am not sure.

Dan

Ronald said:

My interference problems with Polar wireless so far:

S610 and CatEye CordLess2: With both the Polar and the CatEye on the handlebars the speedreading
on the CatEye went everywhere, it was ok with the Polar on the wrist.

S720i and CatEye CordLess2 : CordLess2 was on the bike next to me. The speedreading on the S720i
went to zero. I'm going to try it again with a higher power setting of the speedsensor.

I think you are having problems not related to wireless conflicts. More like not so good mounts.

I have a Flightdeck and a Polar S-720i on my roadbike. No interference whatsoever. I have a Cateye
Cordless 2 and the same Polar S-720i on my hybrid. No interference whatsoever. + Polar cadence on
both bikes.

However it took me a while to get the Polar mounted correct. Once I had it set up straight, it has
always worked nicely. As a matter of fact when the Cateye quit due to sub freezing temperatures the
Polar kept going at least down to -15 C. That's as cold as I was ever out on a bike so I can't
really say how much lower it will go. This was with the standard strenght transmission and the
Cateye and Polar using the same magneto.

--
Perre

Remove and/or replace the DOTs as needed to reply