Simple Question

In article said:

Hi All,

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

Rob:

I use a plastic "Chain Disc," at least that's what one of my is called. It's basically a plastic
disk with a diameter slightly larger than the largest chain ring, which mounts by threading into the
hole which contains the crank mounting bolt. Extrusions on the back of the disk hold it outboard of
the chainring enough so that the chain can move on and off the ring cleanly.

Dont't know if that describes it well, but they work so well I have three of them, one on each of my
bicycles. They cost around $12 each, and should be available at your LBS.

Regards,

Paul Harris Victoria, BC

"Rob Rudeski" skrev...

Quoted message said:

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

Pull the sock over it if you're wearing long socks. Plenty of small gizmos that basically do the
same as the sock such as a reflective strap with velcro in both ends etc. I suppose a wide rubber
band might do the trick if you're cheap 😉 Biking tights or shorts.

M.

tuck your pants leg in your sock. Thank you Earl GRR,RANS V2 Ti Rush,Ti Pursuit

Rob Rudeski said:

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

I simply fold them up - it looks dreadfully if you put them into your socks, i think 😉. However I
also use a Chain Disc like Paul Harris described it, but selfmade from aluminum.

--
Jan-Friedrich Koehle Paderborn, Germany m5 28/20

Rob,

Bike naked!

Ben

Quoted post said:

Originally posted by Rob Rudeski
Hi All,

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

--
Rob Rudeski Trenton, GA RANS V2

"Rob Rudeski" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

What are the techniques that you all use to keep your pant legs from

getting

Quoted message said:

caught in chainring?

Short velcro tie-down straps - one near the hem on each leg. Some company was giving them away last
year at Linux Expo as "multi-platform managment devices."

In article <[email hidden]>,

Jan-Friedrich Kohle said:

Rob Rudeski said:

What are the techniques that you all use to keep your pant legs from getting caught in
chainring?

I simply fold them up - it looks dreadfully if you put them into your socks, i think 😉. However I
also use a Chain Disc like Paul Harris described it, but selfmade from aluminum.

I use a pair of those little straps with velcro that go around the pant legs. The have nice
refelctive strips on them, too. though that would probably show up better on a DF.

Andy

--
President Bush; Don't slash V. A. benefits. Support our troops. Or are you really that much of a
hypocrite?

I think, were I to take your suggestion, I might find myself in the company of folks whose company I
would rather not keep. ;-)

Rob

"Ben" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Rob Rudeski said:

Hi All, What are the techniques that you all use to keep your pant legs from getting caught in
chainring?
--
Rob Rudeski Trenton, GA RANS V2

Rob,

Bike naked!

Ben

--

Quoted message said:

--------------------------<

Posted via cyclingforums.com cyclingforums.comcyclingforums.comOpen ↗

Rob,

I've tried the velcro straps with the reflective tape. They work well. But I wanted something that I
could slip on and off my pant legs quickly. So now I use the metal clips. They're chrome plated,
made out of spring steel. They're elleptical in shape, with an opening on one side. The cost a
dollar or two.

I just fold my pant leg to the outside and snap on the clip, then do other leg. Takes about as long
to do it as it took you to read the last sentence. The downside is that they don't have a reflective
surface like some of the velcro straps do.

I just grew long legs.. ;-) In the cold i use long socks over the pants. I don't really like the
reflective velcro solution, the fabric tend to slip on nylon, and for obvious reasons, I can't place
them at the thinnest part of the leg..

Torben

"Rob Rudeski" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Hi All,

What are the techniques that you all use to keep your pant legs from

getting

Quoted message said:

caught in chainring?

--
Rob Rudeski Trenton, GA RANS V2

Quoted message said:

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

Not riding in loose flappy kecks!

Dave Larrington - legslarry.crosswinds.netlegslarry.crosswinds.netOpen ↗
===========================================================
Editor - British Human Power Club Newsletter
bhpc.org.ukbhpc.org.ukOpen ↗
===========================================================

LeRoy said:

I just fold my pant leg to the outside and snap on the clip, then do other leg. Takes about as
long to do it as it took you to read the last sentence. The downside is that they don't have a
reflective surface like some of the velcro straps do.

I'm sure I've seen clips like this with reflective tape on the outside.

IIRC Halfords in the UK sell them.

--
Carol Hague "...it's not normal if you don't like cake..." - Sean Yates

"Rob Rudeski" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

Hi All,

What are the techniques that you all use to keep your pant legs from getting caught in chainring?

I use the reflective strips with Velcro.

Here's a neat tip: When not in use, I thread them through the vents in my helmet so that they're
always available when I need them... I usually wear bike shorts or tights, but on occasion I do
wear regular trousers, and I was always without the strips when I really needed them. (It's
possible to thread the strips into my helment so that they don't look dorky... may not be possible
with all helmets.)