I started out thinking more pressure made for easier pedaling. Used to pump them up to 55 or 60psi.
Eventually it dawned on me that the lower the pressure I had in my tires, the easier the bik was to pedal. Now I run 35- 40...and I weigh about 220#.
For low pressures, I hear that thread count matters. Higher thread count tires supposedly roll easier. I think my MTB Mutano Raptors are something like 130 tpi. -- PeteCresswell
In article <[email hidden]>, [email hidden] says...
Quoted message said:
From: "(Pete Cresswell)" <[email hidden]> Newsgroups: alt.mountain- bike
RE/
Quoted message said:
inputs on recommended tire pressure:
I started out thinking more pressure made for easier pedaling. Used to pump them up to 55 or 60psi.
Eventually it dawned on me that the lower the pressure I had in my tires, the easier the bik was to pedal. Now I run 35-40...and I weigh about 220#.
For low pressures, I hear that thread count matters. Higher thread count tires supposedly roll easier. I think my MTB Mutano Raptors are something like 130 tpi. -- PeteCresswell
May I just say, damn straight!
All those high pressure running weenies think I'm faster than they are, it's my 28psi tires that's kicking their asses 🙂
-- _________________________ Chris Phillipo - Cape Breton, Nova Scotia ramsays-ramsays-Open ↗ online.com
"Chris Phillipo" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
In article <[email hidden]>, [email hidden] says...
Quoted message said:
From: "(Pete Cresswell)" <[email hidden]> Newsgroups: alt.mountain- bike
RE/
Quoted message said:
inputs on recommended tire pressure:
I started out thinking more pressure made for easier pedaling. Used to
pump
Quoted message said:
Quoted message said:
them up to 55 or 60psi.
Eventually it dawned on me that the lower the pressure I had in my
tires, the
Quoted message said:
Quoted message said:
easier the bik was to pedal. Now I run 35-40...and I weigh about 220#.
For low pressures, I hear that thread count matters. Higher thread
count tires
Quoted message said:
Quoted message said:
supposedly roll easier. I think my MTB Mutano Raptors are something
like 130
Quoted message said:
Quoted message said:
tpi. -- PeteCresswell
May I just say, damn straight!
All those high pressure running weenies think I'm faster than they are, it's my 28psi tires that's kicking their asses 🙂
It all depends on the terrain. If it's rough, there's no reason to run high pressure except for pinch resistance. If it's a smooth fireroad or rails-to-trails type thing then, believe me, the higher the pressure, the faster you go, just like on the road.
"Slacker" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Anus said:
"Bill S" <bills655(nospam)@tampabay.rr.com> wrote in message "]news:[email hidden]...
Quoted message said:
I would appreciate some inputs on recommended tire pressure:
21 speed hard tail
26 x 1.95 tires
my weight is 175 lb.
typical use is mostly on hard packed dirt with some soft sand and big
tree
Quoted message said:
Quoted message said:
Quoted message said:
roots
no significant hills or rocks (central Florida)
the tires are rated for 40 - 65 psi
No fixed answer. Trial and error my friend. Watch out for pinch flats.
😉
Quoted message said:
Quoted message said:
I'm with Anus.
Yep, it's one reason why I like running one brand of tire for so long. With a Motoraptor 2.4 on the front I now know I can run 32.231 psi, under that and I have a 3.54% chance of pinch flatting. With a Velociraptor 2.1 rear I know I can run 48.621 psi and have less than a 5.82% chance of pinch flatting. You should see the charts I've kept. They cover the walls of my garage even though they're in an 8 pt font.