Hi folks, I bought me a nice new shiny v-brake setup - Deore LX levers, and vanilla Deore brakes, new cable, all good. However, it transpires my existing setup has the brake and gear-shift levers in the same unit! It's a Shimano Ez-Fire I think. What do folks recommend I do about this one? Where's the best place in the UK to get a new pair of shifters for a 7-speed setup?
Also, I'm trying to get the bar-grips off my handlebars and I'm having no luck - they seem stuck fast! Is this common? What can I do apart from cut 'em off and buy me a new pair?
When I need to remove bar grips I fill a small hypodermic syringe with rubbing alcohol (denatured alcohol) and inject it between the handlebar and the grip in several places. Just poke the needle through the grip and push the plunger a bit. The alcohol loosens and lubricates and after turning the grip back and forth a couple of times it slips right off. When I put grips on I pour a little alcohol into the grip and slosh it around to coat the inside, pour a bit into my cupped hand and rub it on the handlebar and thus lubricated the grip slips right on. The grip isn't secure until the alcohol drys overnight. Water could be used in place of the alcohol but would take longer to dry. Vodka could be used in place of the rubbing alcohol but . . . such a waste.
I don't know how easy it is to obtain a hypodermic syringe in the UK. Here in the States I've always gotten them at a pharmacy with no problem. The easiest way to get the alcohol into the syringe is to pull the plunger out the back, pour the barrel full and then push the plunger back in. Much quicker than drawing it in through the small bore of the needle.
"Gearóid Ó Laoi, Garry Lee" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Get a can of WD40
left edge of grip, insert plastic nozzle extension under this and squirt. Grips come off no problem. Air also works apparently.
WD40 method seconded - may need to use small blade screwdriver to lever first bit of grip to get the nozzle in. Also use to re-attach - takes some time to stick tho, best overnight. JonMaC
Robert Taylor <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Yes, WD40 will work to help remove or attach grips but I think it has a foul and lingering smell.
Bob Taylor
I'll secondy third the WD40 method too!
Have a look at the shifter/brake combo and see if you can hacksaw them apart. My description sounds brutal, but I done that with a set years ago and after filing down and touching up with matt black paint they looked no different.
-- Mark ____________________________ Practice does not make perfect... Perfect practice makes perfect
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗). Version: 6.0.465 / Virus Database: 263 - Release Date: 25/03/03
