I won a bike over the winter and just put it together a few weeks ago. One thing I can't see is how to adjust the handlebar height. The handlebars had an attachment which fits around the approx. 1½" of tubing extending above the headtube, and which you tighten with 2 hex- bolts. When I remove the top cap hex-bolt and remove the cap I don't see anything that allows for an up/down adjustment. It's a Canadian Tire "SuperCycle" bike manufactured by Krane (Chinese I think). I need to raise them approx. 5 - 6 inches.
Any ideas as to what I'm missing? Do I need a riser of some kind? Any help would be appreciated . .. I can't wait to get biking again !! :-)
I won a bike over the winter and just put it together a few weeks ago. One thing I can't see is how to adjust the handlebar height. The handlebars had an attachment which fits around the approx. 1½" of tubing extending above the headtube, and which you tighten with 2 hex- bolts. When I remove the top cap hex-bolt and remove the cap I don't see anything that allows for an up/down adjustment. It's a Canadian Tire "SuperCycle" bike manufactured by Krane (Chinese I think). I need to raise them approx. 5 - 6 inches.
Any ideas as to what I'm missing? Do I need a riser of some kind? Any help would be appreciated . .. I can't wait to get biking again !! :-)
Sounds like the steer tube was cut down a bit severely.
You have a few choices -
1. replace stem - get more rise and/or less reach 2. replace bars - get a riser bar 3. install a steer tube extender, around US$20 or so 4. replace the fork and leave the steer tube longer
#1 and #3 are the least work.
Keep in mind that significant changes in rise/reach may necessitate replacing some or all of the cables and housing.
I won a bike over the winter and just put it together a few weeks ago. One thing I can't see is how to adjust the handlebar height. The handlebars had an attachment which fits around the approx. 1½" of tubing extending above the headtube, and which you tighten with 2 hex- bolts. When I remove the top cap hex-bolt and remove the cap I don't see anything that allows for an up/down adjustment. It's a Canadian Tire "SuperCycle" bike manufactured by Krane (Chinese I think). I need to raise them approx. 5 - 6 inches.
By the way, needing to raise the bars 5-6 inches may be telling you this bike doesn't fit.
Jocko wrote: :: I won a bike over the winter and just put it together a :: few weeks ago. One thing I can't see is how to adjust the :: handlebar height. The handlebars had an attachment which :: fits around the approx. 1½" of tubing extending above the :: headtube, and which you tighten with 2 hex-bolts. When I :: remove the top cap hex-bolt and remove the cap I don't :: see anything that allows for an up/down adjustment. It's :: a Canadian Tire "SuperCycle" bike manufactured by Krane :: (Chinese I think). I need to raise them approx. 5 - 6 :: inches. :: :: Any ideas as to what I'm missing? Do I need a riser of :: some kind? Any help would be appreciated . .. I can't :: wait to get biking again :: !! :-) ::
Take it to your local bike shop and ask them to fit you to it (if possible) after putting it together.
In article <[email hidden]>, [email hidden] says...
Quoted message said:
I won a bike over the winter and just put it together a few weeks ago. One thing I can't see is how to adjust the handlebar height. The handlebars had an attachment which fits around the approx. 1½" of tubing extending above the headtube, and which you tighten with 2 hex- bolts. When I remove the top cap hex-bolt and remove the cap I don't see anything that allows for an up/down adjustment. It's a Canadian Tire "SuperCycle" bike manufactured by Krane (Chinese I think). I need to raise them approx. 5 - 6 inches.
Any ideas as to what I'm missing? Do I need a riser of some kind? Any help would be appreciated . .. I can't wait to get biking again !! :-)
Not adjustable. You can try flipping the stem to see if that puts it in a better position. Otherwise, you need to buy a new stem. -------------- Alex
