Home UK and Europe Bottom bracket
This thread is locked and is currently read-only.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
Original section UK and Europe
Published 8 May 2004
Last activity 10 May 2004
Original author Alex
Posts 11
Discussion status Public discussion
Total views 714
Views / 30 days 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Showing posts 1–11 of 11 Posts remain in their original chronological order.
Original post Alex
Archived post
Sorry to come on with a question but it seemed a good place to start. My bottom bracket is a shimano 73mm x 113 crank length. cups 1.37x24
I can buy one on e-bay 73x118. Will this fit or will the 5mm difference effect the front crank to rear wheel sprocket. the cycle has three cranks,
regards............Alex.
Zog The Undenia
Archived post
Alex said: Sorry to come on with a question but it seemed a good place to start. My bottom bracket is a shimano 73mm x 113 crank length. cups 1.37x24
I can buy one on e-bay 73x118. Will this fit or will the 5mm difference effect the front crank to rear wheel sprocket. the cycle has three cranks,
It will fit but the chainline will be wrong. Get one the same length if the current setup is correct.
Alex said: My bottom bracket is a shimano 73mm x 113 crank length. cups 1.37x24
I can buy one on e-bay 73x118.
You can buy a new 113mm UN73 for £11.99 post free from:tinyurl.com 3gx5l Open ↗
~PB
"Zog The Undeniable" <[email hidden]> wrote in message news:409d0c1d.0@entanet...
Quoted message said: It will fit but the chainline will be wrong. Get one the same length if the current setup is correct.
-------------------------------------------------- Thanks! I was worried that might be the case, will carry on looking.
"Zog The Undeniable" <[email hidden]> wrote in message news:409d0c1d.0@entanet...
Quoted message said: Alex wrote: It will fit but the chainline will be wrong. Get one the same length if the current setup is correct.
---------------------------------- Just one more question I can buy a 113 X 68 mine is 113 X 73
will it fit or do i need the exact size?
REgards............Alex.
"Pete Biggs" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said: Alex said: My bottom bracket is a shimano 73mm x 113 crank length. cups 1.37x24
I can buy one on e-bay 73x118.
You can buy a new 113mm UN73 for £11.99 post free from:tinyurl.com 3gx5l Open ↗
---------------------------------------------- Got one Thanks! thanks also to the other help. great group.
Alex.
Zog The Undenia
Archived post
Alex wrote: ----------------------------------
Quoted message said: Just one more question I can buy a 113 X 68 mine is 113 X 73
will it fit or do i need the exact size?
You need the exact size. The 68mm version will not be properly held by the cups.
"Alex" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said: "Zog The Undeniable" <[email hidden]> wrote in message news:409d0c1d.0@entanet...
Quoted message said: Alex wrote: It will fit but the chainline will be wrong. Get one the same length if the current setup is correct.
---------------------------------- Just one more question I can buy a 113 X 68 mine is 113 X 73
will it fit or do i need the exact size?
REgards............Alex.
No, you need the right width (which is what the 68 or 73 refers to - it's the width of your bottom bracket shell).
--- Outgoing mail is certified Virus Free. Checked by AVG anti- virus system (grisoft.com grisoft.com Open ↗ ). Version: 6.0.679 / Virus Database: 441 - Release Date: 07/05/2004
The 73mm figure is the width of the frame, so this *has* to be the same.
The 113mm figure is the overall length, so there's a *little* bit of leeway in this, but if your current alignment is correct then you don't want to go more than a couple of mm either side of this, or you'll have trouble keeping the chain on the desired chainring...
HTH
Huw Francis
"Alex" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said: "Zog The Undeniable" <[email hidden]> wrote in message news:409d0c1d.0@entanet...
Quoted message said: Alex wrote: It will fit but the chainline will be wrong. Get one the same length if the current setup is correct.
---------------------------------- Just one more question I can buy a 113 X 68 mine is 113 X 73
will it fit or do i need the exact size?
REgards............Alex.
10 May 2004, 13:03 UTC
#10
In message <[email hidden]>
Simon Brooke said: in message <[email hidden]>, Alex
(') said: Sorry to come on with a question but it seemed a good place to start. My bottom bracket is a shimano 73mm x 113 crank length. cups 1.37x24
I can buy one on e-bay 73x118. Will this fit or will the 5mm difference effect the front crank to rear wheel sprocket. the cycle has three cranks,
Your front deraileur won't throw far enough to move the chain onto your big chainwheel. Don't do it.
OR your inner chainring may / will rub on the frame
Quoted message said: -- Gwyn
Just Zis Guy
Archived post
10 May 2004, 13:19 UTC
#11
Gwyn Oakley said: OR your inner chainring may / will rub on the frame
Correct. Cured by a longer axle, of course, so not fatal.
-- Guy === May contain traces of irony. Contents liable to settle after posting. chapmancentral.co.uk chapmancentral.co.uk Open ↗
Victory is ours! Down with Eric the Half A Brain!
Active in the last 60 minutes
Active in this thread
0 users
·
0 guests
· 0 bots
· 0 total
No signed-in users are active right now.
No known search crawlers active right now.