I hope that it's not the same person that built the wheelset that collapsed.
The spokes won't make much difference. The quality spoke makers all make decent stuff. Why would black be stronger? My black DT spokes just made my hands dirty when I was building the wheel.
Derk Drukker said:
Hi!
This afternoon the 12 year old rim of my rearwheel suddenly collapsed.
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person who'll do this recommended me the black Sapim spokes, "because they are stronger".
Exactly..likely, that's the only colour the guy has in stock as well...and they usually cost more..
Cheers,
Scott.. -- Scott Anderson
"Paul Kopit" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I hope that it's not the same person that built the wheelset that collapsed.
The spokes won't make much difference. The quality spoke makers all make decent stuff. Why would black be stronger? My black DT spokes just made my hands dirty when I was building the wheel.
Stronger than what? Silver Sapim's or black DT etc.? I do have very good experiences with Sapim Race spokes which accidently all were black, but i doubt the color will make much difference.
"Derk Drukker" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Hi!
This afternoon the 12 year old rim of my rearwheel suddenly collapsed.
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person who'll do this recommended me the black Sapim spokes, "because they are stronger".
"Huw Pritchard" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
On Tue, 18 Mar 2003 23:02:11 +0100, Derk Drukker did issue forth:
Quoted message said:
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person
who'll
Quoted message said:
Quoted message said:
do this recommended me the black Sapim spokes, "because they are stronger".
Is there any truth in it, or is this just humbug?
They're not stronger, but due to the minute air currents created by the heat radiated by the black surface, they will make you go faster.
Is THAT why zebras can run so fast when chased by a lion? I always wondered about that.
Mike
Quoted message said:
-- Huw Pritchard Replace bounce with huw to reply by mail
Actually, the zebras (and Mario Cipollini) use a different effect; the black stripes are painted on top of the white base coat, causing small ridges. The boundary layer turbulence caused by the edges of these small ridges allows the boundary layer to adhere to the suface further back towards the trailing edge, reducing induced drag.
Kinky Cowboy
*Your milage may vary Batteries not included May contain traces of nuts.
d drucker- << I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person who'll do this recommended me the black Sapim spokes, "because they are stronger".
Add to myth and legend file. Hard to get a poor spoke these days from the major makers-Alpina, Sapin, DT, Wheelsmith all make good spokes and certainly the color has nothin' to so with it.
Have the wheel builder pick the components according to you and your riding needs, have the builder build it well...
'Conventional wheels built exceptionally well' is the key...
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302 (303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"
In article <[email hidden]>, [email hidden] says...
Quoted message said:
Hi!
This afternoon the 12 year old rim of my rearwheel suddenly collapsed.
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person who'll do this recommended me the black Sapim spokes, "because they are stronger". Is there any truth in it, or is this just humbug?
humbug. Also, what makes you think you need stronger spokes? A stronger spoke will not necessarily make a wheel that can support more weight. ----------------- Alex __O _-\<,_ (_)/ (_)
I just built a series of wheels with the new black Sapim 14/15 race spokes. I don't know about the wheels running any faster, but they sure look great. It was my first experience with Sapim and the wheels built up uneventfully fine. I did notice that the black spokes made it a lot easier to see if there were any extra parts left over, after the wheels were built. The blue spoke-prep was striking against the dramatic ebony finish of the spokes. It made the wheel balance a lot better.... :-)
After the first 5,000 miles, we can then argue and wager on how long the wheels will last. If I change the wheel bearing grease regularly, will the spokes last longer?
Bruce
"Derk Drukker" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Hi!
This afternoon the 12 year old rim of my rearwheel suddenly collapsed.
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person who'll do this recommended me the black Sapim spokes, "because they are stronger".
"Bruce Gilbert" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I just built a series of wheels with the new black Sapim 14/15 race
spokes.
Quoted message said:
I don't know about the wheels running any faster, but they sure look
great.
Quoted message said:
It was my first experience with Sapim and the wheels built up uneventfully fine. I did notice that the black spokes made it a lot easier to see if there were any extra parts left over, after the wheels were built. The
blue
Quoted message said:
spoke-prep was striking against the dramatic ebony finish of the spokes.
It
Quoted message said:
made the wheel balance a lot better.... :-)
After the first 5,000 miles, we can then argue and wager on how long the wheels will last. If I change the wheel bearing grease regularly, will the spokes last longer?
Bruce
Only if you've tied the spokes in a square knot, then soldered them, AND you're in the southern hemisphere.
Mike
Quoted message said:
"Derk Drukker" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Hi!
This afternoon the 12 year old rim of my rearwheel suddenly collapsed.
I have a new 36 spokes, ultegra, CXP 33 wheelset built. The person
who'll
Quoted message said:
Quoted message said:
do this recommended me the black Sapim spokes, "because they are stronger".
Most of the times I had a broken spoke, it was after shifting gears while climbing a steep hill in France.
So the reason I haven't ever broken a spoke is that I do not ride in France??
Gramatically one needs a word like "because" to indicate a reason why something happens. This word is missing here, so this sentence doesn't mean "the risk is great to break spokes while cycling in France", but "it was in France while cycling up a steep hill (in France onefinds steep climbs: in Holland we don't have those, so stress will be less om spokes) that I had broken spokes". But you are right: for non-Dutch readers I could have left the "in France" part out, but then again Dutch readers would have complained: "how is that possible? We don't have steep climbs here, so that can't be true". Just like the mail I wrote about Connex chains where one asks information about these chains and I give my own experiences with it. Then you start getting mails from people who say that they have never had problems, so I must be lying.......
After the first 5,000 miles, we can then argue and wager on how long the wheels will last. If I change the wheel bearing grease regularly, will the spokes last longer?
Sorry but how/why would changing the wheel bearing make the spokes last longer? It'll likely make your hub roll smoother and last longer though.