CyclingForums
A community for cyclists, gear, training and racing.
General fitness, health and nutrition · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Hi all
My pasta machine seems to be grating itself (metal on metal)
where the barrels meet the frame and it is leaving nasty
black stuff on the edge of the sheet
It says I cant wet it on the instructions? Its a "ethos"
machine, cost 30euro (about 30bucks)
Any thoughts? Cheapo machine?
Cheers
Niall
---
Outgoing mail is certified Virus Free. Checked by AVG anti-
virus system (grisoft.comgrisoft.comOpen ↗). Version: 6.0.622 /
Virus Database: 400 - Release Date: 13/03/2004
"Niall Smyth" <[email hidden]> wrote in
message "]news:[email hidden]...
: Hi all
:
: My pasta machine seems to be grating itself (metal on
: metal) where the barrels meet the frame and it is leaving
: nasty black stuff on the edge of the sheet
:
: It says I cant wet it on the instructions? Its a "ethos"
: machine, cost 30euro (about 30bucks)
:
: Any thoughts? Cheapo machine?
:
: Cheers
:
: Niall
===========
Have you tried putting a drop or two of oil at the spot
where the metal is rubbing? I would suggest either olive oil
or mineral oil. After you do that, try running a scrap piece
of pasta dough through it a couple of times to absorb the
remnants of the metal filings and black yuckies. Then be
sure to throw that piece of dough away. LOL That should take
care of your problem. If not, you may need to contact the
manufacturer.
--
Cyndi <Remove a "b" to reply
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.