Mountain Bikes · Public discussion

Any good?

Started by Doki · · Last activity · 4 posts · 677 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
5 March 2004
Last activity
5 March 2004
Original author
Doki
Posts
4
Discussion status
Public discussion
Total views
677
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. My local bike hire place are selling off some of their bikes, Giant Boulders
    as in this url:
    tinyurl.com2bqcf

    I've not ridden a bike for ages so I don't expect to be hammering it too much straight away, but I'd
    to buy prefer something OK. Are the RST forks cack? I've not heard of them. Are the other bits all
    relatively OK? Would replacing the Forks cost me an arm and a leg if they're [censored], or I break them?
    I don't plan on doing much mountain biking until I've done some road cycling on it build up some
    stamina, so the forks can be swapped later without them being too much of a pain in my [censored] in the
    meantime... Of course, that's assuming the frame isn't a POS 😉.

    TIA

  2. It looks pretty marginal from the info on the link. RST makes a whole line of shocks, but the low
    end ones are junky (as with many other makers). Acera components are some of the lowest quality
    stuff made by Shimano, mostly for the "department store" level market. Probably for the same price
    you could get something very decent in the lightly used market. Find a knowlegable friend to help
    sort out decent frames and componentry.

    A good entry level fork might run you $200US. A decent wheelset probably about the same. Most frames
    with good welds and design will be several hundred bucks. Certainly buying the package is more
    economical, just throwing out those (very) rough numbers so you can evaluate what level of quality
    you'd get for your money...

    No offense, but if you're just getting into it, what makes you think you need full suspension? The
    cost of a good FS frame can be double that of a good hardtail (no rear suspension) frame. A junky
    one will be heavy, flexy, have poor welds, bad pivots and a crappy shock. All of which will not
    contribute to a good time on the trails. Save some money by getting a better quality hardtail bike
    with decent fork, gears and brakes. Ride it for a couple of years and then see if you think you'd
    prefer a RS bike. By that time you'll have a good feel for climbing, tight corners and control at
    speed, and be a better judge as to whether FS is what you want.

    Cheers Gary

    "Doki" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    My local bike hire place are selling off some of their bikes, Giant


    Boulders

    Quoted message said:

    as in this url: tinyurl.com2bqcf

    I've not ridden a bike for ages so I don't expect to be hammering it too much straight away, but
    I'd to buy prefer something OK. Are the RST forks cack? I've not heard of them. Are the other bits
    all relatively OK? Would replacing the Forks cost me an arm and a leg if


    they're

    Quoted message said:

    [censored], or I break them? I don't plan on doing much mountain biking until


    I've

    Quoted message said:

    done some road cycling on it build up some stamina, so the forks can be swapped later without them
    being too much of a pain in my [censored] in the meantime... Of course, that's assuming the frame isn't
    a POS 😉.

    TIA

  3. "Doki" <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:

    My local bike hire place are selling off some of their bikes, Giant Boulders as in this url:
    tinyurl.com2bqcf

    I've not ridden a bike for ages so I don't expect to be hammering it too much straight away, but
    I'd to buy prefer something OK. Are the RST forks cack? I've not heard of them. Are the other bits
    all relatively OK? Would replacing the Forks cost me an arm and a leg if they're [censored], or I break
    them? I don't plan on doing much mountain biking until I've done some road cycling on it build up
    some stamina, so the forks can be swapped later without them being too much of a pain in my [censored]
    in the meantime... Of course, that's assuming the frame isn't a POS 😉.

    It's better to buy a good bike to start. If you're short on cash, then this is a good place to
    start, and when/if you break stuff, replace it with better (on sale) stuff.

    But if you go in thinking "I'm buying this bike for the frame" you'll end up spending WAY more money
    than just buying a better bike from the start.
    --
    Jonesy

  4. "Doki" <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:

    My local bike hire place are selling off some of their bikes, Giant Boulders


    <snip>

    You don't ride on giant boulders, you ride over them:
    forums.mtbr.comimage.php

    JD

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.