UK and Europe · Public discussion

Squeak,Squeak ,Squeak

Started by Sam Salt · · Last activity · 3 posts · 682 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
UK and Europe
Published
25 February 2003
Last activity
27 February 2003
Original author
Sam Salt
Posts
3
Discussion status
Public discussion
Total views
682
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. I have not long had a new rear mech fitted,Deore LX.All was quiet at first but an annoying squeak
    has developed when changing into a larger sprocket.It is silent when going to a smaller sprocket,no
    noise at all.It is difficult to determine where exactly the squeak is coming from but it appears to
    arise from the cassette/chain itself rather than the mech.I have lubricated the mech,the chain
    (after a good clean ),sprayed some on the sprockets, and also squirted some down the cable but the
    squeak persists.It may not be anything to do with the new mech,in fact I don't think it is,but it is
    slowly getting on my nerves.The cassette is 8-speed MegaRange.It changes gear with no problem except
    for the squeak.Anyone any ideas please.

    Sam Salt

  2. "Sam Salt" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have not long had a new rear mech fitted,Deore LX.All was quiet at first but an annoying squeak
    has developed when changing into a larger


    sprocket.It

    Quoted message said:

    is silent when going to a smaller sprocket,no noise at all.It is difficult to determine where
    exactly the squeak is coming from but it appears to


    arise

    Quoted message said:

    from the cassette/chain itself rather than the mech.I have lubricated the mech,the chain (after a
    good clean ),sprayed some on the sprockets, and


    also

    Quoted message said:

    squirted some down the cable but the squeak persists.It may not be


    anything

    Quoted message said:

    to do with the new mech,in fact I don't think it is,but it is slowly


    getting

    Quoted message said:

    on my nerves.The cassette is 8-speed MegaRange.It changes gear with no problem except for the
    squeak.Anyone any ideas please.

    Sam Salt

    It's probably your top jockey wheel. When they get dry they tend to squeak when you change gear one
    way or the other. The grease applied at the factory is minimal and if you've done much wet or muddy
    riding, it's probably been flushed out.

    Take it off, clean it and bung some fresh grease on it before reassembly.

    --
    Adam Dugmore

    Kona Explosif Honda CB500R - Much easier uphill

    Spamtrapped email

  3. Thanks Adam will give it a go.

    Sam Salt "Adam Dugmore" <adam.dugmore@SPAM_AND_DIEbtinternet.com> wrote in message
    "]news:[email hidden]...

    Quoted message said:


    "Sam Salt" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have not long had a new rear mech fitted,Deore LX.All was quiet at


    first

    Quoted message said:
    Quoted message said:

    but an annoying squeak has developed when changing into a larger


    sprocket.It

    Quoted message said:

    is silent when going to a smaller sprocket,no noise at all.It is


    difficult

    Quoted message said:
    Quoted message said:

    to determine where exactly the squeak is coming from but it appears to


    arise

    Quoted message said:

    from the cassette/chain itself rather than the mech.I have lubricated


    the

    Quoted message said:
    Quoted message said:

    mech,the chain (after a good clean ),sprayed some on the sprockets, and


    also

    Quoted message said:

    squirted some down the cable but the squeak persists.It may not be


    anything

    Quoted message said:

    to do with the new mech,in fact I don't think it is,but it is slowly


    getting

    Quoted message said:

    on my nerves.The cassette is 8-speed MegaRange.It changes gear with no problem except for the
    squeak.Anyone any ideas please.

    Sam Salt

    It's probably your top jockey wheel. When they get dry they tend to


    squeak

    Quoted message said:

    when you change gear one way or the other. The grease applied at the factory is minimal and if
    you've done much wet or muddy riding, it's probably been flushed out.

    Take it off, clean it and bung some fresh grease on it before reassembly.

    --
    Adam Dugmore

    Kona Explosif Honda CB500R - Much easier uphill

    Spamtrapped email

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.