Ti for cyclocross

"Matthew Thomas" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I am contemplating dabbling in cyclocross next fall and am shopping around for a frame. I asked a
cx-racer buddy of mine about frames and he said Ti was "a no no" because it flexed too much. Is
this true? I ride a Habanero road frame, and at 180 lbs. I can't detect a whole lot of flex in it.

You already have your answer. That said, I think the best value is in steel and the
lightest-cheapest are aluminum.

Robin Hubert

Matthew Thomas at [email hidden] wrote on 2/25/03 7:32 AM:

Quoted message said:

I am contemplating dabbling in cyclocross next fall and am shopping around for a frame. I asked a
cx-racer buddy of mine about frames and he said Ti was "a no no" because it flexed too much. Is
this true? I ride a Habanero road frame, and at 180 lbs. I can't detect a whole lot of flex in it.

It's a sad thing, midseason in Cross... All these discarded noodly titanium cross frames, spread
across the landscape, rotting in the landfills, discarded like old apple cores. . .

- or -

1 - Frame fit

2 - Clearance for Mud and stuff

3 - Materials

A pertinent question or two for your buddy, "Hunh? Which one was that exactly you're talking about?
How long did you ride it?"

There's a ton of good cross frames around now. Steel gives clearance, Alu gives slightly lighter
weight, Ti is probably just beyond most crosser's winter budget, but would tend to have better
clearance, light weight and all that non-ferrous weather resistance.

"Jim Edgar" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Matthew Thomas at [email hidden] wrote on 2/25/03 7:32 AM:

Quoted message said:

I am contemplating dabbling in cyclocross next fall and am shopping around for a frame. I asked
a cx-racer buddy of mine about frames and he said Ti was "a no no" because it flexed too much.
Is this true? I ride a Habanero road frame, and at 180 lbs. I can't detect a whole lot of flex
in it.

It's a sad thing, midseason in Cross... All these discarded noodly

titanium

Quoted message said:

cross frames, spread across the landscape, rotting in the landfills, discarded like old apple
cores. . .

- or -

1 - Frame fit

2 - Clearance for Mud and stuff

3 - Materials

A pertinent question or two for your buddy, "Hunh? Which one was that exactly you're talking
about? How long did you ride it?"

There's a ton of good cross frames around now. Steel gives clearance, Alu gives slightly lighter
weight, Ti is probably just beyond most crosser's winter budget, but would tend to have better
clearance, light weight and

all

Quoted message said:

that non-ferrous weather resistance.

I don't know about y'all, but my 'cross bike isn't the primary bike in the quiver. As such, it was
pieced together out of various bits and pieces I had laying around, or could find for cheap.

I too dabbled a bit in 'cross this last winter (racing's started in San Diego already). I didn't
know if I'd like it or not, what made a good 'cross frame, and what components were needed. I bought
a used TET 'cross frame/fork for $175, and for another $2-300, built a complete 'cross bike. I found
out that my Prestige steel frame rides like a champ, is reasonably light, but may be a bit short
thru the top tube.

My recommendation: buy something used, fairly inexpensive. That way, if you decide that you don't
really like 'cross, you're not out big bucks.

If you ride a 55cm road frame, I have a Kona 'cross frame/fork for sale that a buddy of mine backed
out on. Email me for details.

Mike

"Matthew Thomas" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I am contemplating dabbling in cyclocross next fall and am shopping around for a frame. I asked a
cx-racer buddy of mine about frames and he said Ti was "a no no" because it flexed too much. Is
this true? I ride a Habanero road frame, and at 180 lbs. I can't detect a whole lot of flex in it.

So you are saying that either the incessant cycling rumor mill or your own empirical experience was
wrong. Gee, I wonder which?

--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

bigmatt-<< I am contemplating dabbling in cyclocross next fall and am shopping around for a frame. I
asked a cx-racer buddy of mine about frames and he said Ti was "a no no" because it flexed too much.
Is this true?

No...yikes, where do people get these ideas.

<< I ride a Habanero road frame, and at 180 lbs. I can't detect a whole lot of flex in it.

If Habanero makes a cross frameset, it will be a good one...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"