Cycling Equipment · Public discussion

Tyre repairs advice

Started by gw709 · · Last activity · 5 posts · 1,126 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
20 January 2004
Last activity
22 January 2004
Original author
gw709
Posts
5
Discussion status
Public discussion
Total views
1,126
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I have a (almost) new vittoria tyre that got a small glass cut through the main body of the tyre.

    is it ok to put a patch on the inside of the tyre & glue the cut closed & then use it as a training tyre???

    If the answer to the above is ok what would one use as the patch - does a patch that you would use on a tube work ok, or do i need to find a specific "gator"

    thks

    gaw

  2. Quoted post said:

    Originally posted by gw709
    I have a (almost) new vittoria tyre that got a small glass cut through the main body of the tyre.

    is it ok to put a patch on the inside of the tyre & glue the cut closed & then use it as a training tyre???

    If the answer to the above is ok what would one use as the patch - does a patch that you would use on a tube work ok, or do i need to find a specific "gator"

    thks

    gaw

    I tried the type of repair you describe on a new Pro Race tire which got a cut about 1 cm long on my second ride with it.

    I used a Park glueless patch, and then rubber cement from the outside. Didn't hold. A thicker glued-on patch may work better.

    Thought about backing up the patch with a thin plastic "boot" (gator?) but never did try that; bought a 3000 instead.

    If you come up with a repair that holds, please post. Good luck.

  3. Quoted post said:

    Originally posted by gw709
    I have a (almost) new vittoria tyre that got a small glass cut through the main body of the tyre.

    is it ok to put a patch on the inside of the tyre & glue the cut closed & then use it as a training tyre???

    If the answer to the above is ok what would one use as the patch - does a patch that you would use on a tube work ok, or do i need to find a specific "gator"

    thks

    gaw

    If the cut is less that 3 mm and the tyre has more that 60 TPI then I can tell you that you can continue to use it, but any cut bigger than that is a riks.

    If you continue to use it the check it before and after any ride, also after inflating.

    Thre is no good/durable fix for that. In the old times people used to have another tyre inside with the sidewalls cut off.

    Anyway in you case I would replace the tyre.

    br

    froque

  4. i've patched small holes with a gluable patch and it lasted for quite some time. when you're using the sandpaper to rough up/clean the surface, don't go crazy and cut into the threads of the sidewall.

    1cm is pretty big, though. i'd say that tire is/was toast.

  5. Have seen it done : didn´t work . Put it down to bad luck ( lost a michelin like this ) and replace . A good reason for using economic tyres in areas with lots of debris , it´s a pain isn´t it .

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.