Recently had a sidewall failure on a Continental 700 x 28 Gatorskin tire. Mounted once and only once
on a Weiman Concave rim it blew at less than 350 miles. The sidewall suffered an inch and a quarter
"cut" right next to the wire bead. The tire material surrounded the inside of the bead but the bead
could be observed from the tire side.
This was on the rear of our tandem. We are a big team 400+ pounds. Tire was allways inflated to 120
psi and topped off to 120 psi with a borrowed floor pump the previous day. Two days before we had
done a 7% ten mile long descent. Stopped half way down and felt the rims. The front was only warm to
the touch, could have continued finger contact indefinately. The rear did not feel warm at all.
The failure was near the valve thus I had not used tire irons in the damaged area to mount the tire.
When the tire failed we were coasting down a very smooth newly paved road. I am not aware of us
hitting anything there or anywhere else that would have damaged the tire.
Didn't fall but we often go MUCH faster so this incident is disconcerting. Was it the tire, the rim,
the pressure, the heat? All insights will be appreciated.
Thanks in advance, Bob