Equipment Report.
Just got my Park TM-1. The tool come with a sticker on it saying when it was last calibrated,
12/7/2003. Park will also re-calibrate the tool for a fee if needed.
I decided to check an old MTB wheel I built without the tool. According to the tool all my spokes
were well within the 20% relative avg tension per each side of the wheel. You/I can achieve this by
pinging the spoke with and listening to the tone of the spoke. This method works very well indeed as
verified by the TM-1.
What the TM-1 brings to the table though is you can actually get an accurate reading of the spoke
tension in Kilograms Of Force, which can easily be converted to Pounds or Newtons. This is important
because you don't want to go over the recommended rating for your hoops, hubs, or spokes.
Can't wait to start building my wheels.
Peace, Bill ...one speed to rule them all, one speed to find them, one speed to bring them all and
on the trails pass them In the Land of Avalon where the geared pigs lie...