CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I just got my wife a new saddle for her bike the other day, and it's tilted too far forward for her.
I loosened the hex bolt underneath the seat on the post that keeps the saddle clamped down, and allows for fore/aft adjustment, but I can't angle the seat. Are there seats that can be angled and seats that can't? I've tried tilting the seat, and then tightening down the clamps, but when I tighten the clamp, it just pulls the seat back into the same position. 😕
There is probably another bolt at the FRONT of the cradle which is not making itself readily apparent to you ...
If you can't see/find it, then post a picture of the seatpost (without the saddle in place).
Okay, I got it straightened out. There is only 1 bolt, but there are threads on the clamp, and I just had to move the post back and forth a little bit. I didn't have the post loosened enough from the clamp to make this adjustable.
Thanks for the help! 😉
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.