Looking for a new fork for my 04 trek 4900. Currently have a rock shox pilot c that came stock on the bike. Im thinking about getting a rock shox tora 302 or dart 3, does anyone have any input on either of those? Thanks
Mountain Bikes · Public discussion
New Fork
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Mountain Bikes
- Published
- 24 July 2010
- Last activity
- 31 July 2010
- Original author
- GV2013
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 1,115
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
GV2013 said:
Looking for a new fork for my 04 trek 4900. Currently have a rock shox pilot c that came stock on the bike. Im thinking about getting a rock shox tora 302 or dart 3, does anyone have any input on either of those? Thanks
You can find user feedback on most MTB components/frames/etc. at www.MTBR.com.FWIW. I currently have a Marzocchi Bomber fork on my Hardtail.
-
GV2013 said:
Looking for a new fork for my 04 trek 4900. Currently have a rock shox pilot c that came stock on the bike. Im thinking about getting a rock shox tora 302 or dart 3, does anyone have any input on either of those? Thanks
I have a Rock Shox Tora 302 on my GT Avalanche and it's served me well. No complaints here.
-
Im most likely going to go with a dart 3 or tora 302. is installing a new fork difficult? or is the only thing you need to do cut the tube to the same length as the current one and swap them out?
-
GV2013 said:
Im most likely going to go with a dart 3 or tora 302. is installing a new fork difficult? or is the only thing you need to do cut the tube to the same length as the current one and swap them out?
That's probably 90% of the new installation ...
You will also need to move the shoulder race from the old fork to the new fork ...
And, tap the Star Nut into the steerer.
BTW. I find that it is MUCH EASIER to install the new fork with the frame turned upside-down ... that is, let gravity assist you (rather than fight you) in setting the fork in the frame ... this applies to Road forks, too.
FYI. In case you don't already know, the primary function of the Top Cap is used to adjust/load the tension on the headset bearings.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.