How do I replace rear hub bearings and how do I know what size I need?
Mountain Bikes · Public discussion
Hub Bearings
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Mountain Bikes
- Published
- 20 April 2010
- Last activity
- 20 April 2010
- Original author
- garyreiter
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 1,544
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
garyreiter said:
How do I replace rear hub bearings and how do I know what size I need?
If you are replacing CARTRIDGE bearings, then you can read the size you need on the plastic shroud that covers at least one side of each of the cartridges ...
If you are replacing LOOSE bearings, then the size is probably 1/4" (you'll need nine per side) ... TWO EXCEPTIONS which are known to me (there may be others) whose bearings are smaller would be the Maillard Helicomatic hub + the earliest Shimano Dura Ace Freehub.
-
If bearings are Shimano, you can find the parts diagram for the hub on their website. For example:
You could also check the BocaBearings website:
Boca Bearings - Miniature Bearings for Hobby&IndustryIf you happen to order replacements from Boca, try this code to get 10% off (not sure if still good): 5ddrdx06
Even if you don't order from Boca, their site will show you the number and size of bearings needed for your hubs.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.