NEED HELP..Disc Brake problem

"Grippedclimer" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi, I just finished building a sweet XC bike. Test drove last week and took it out today and some
more challenging terrain. Unfortunately, I crashed into a tree with my left handle bar. After some
time, I noticed that my front brake was not working and brake fluid was running down the line.
After checking, the line had cracked (probably when I nailed the tree) where it attaches to the
brake lever (right at the bolt). What is the best way to repair? Can I cut the line, re-attach and
then bleed? How do you bleed these things? I found nothing on the Hayes site. Any help would be
appreciated (direct email would be great). I am gonna tear apart tonight and hopefully figure
something out so I can ride tomorrow.

Thanks in advance,

Mike Esparza [email hidden]

If you're lucky than you'll only need to cut the hose just past the break and re-install. The only
part you'll need is the compression bushing, which can never be reused.

Otherwise, you may have cracked the inlet tube on the master. In this case you'll be dishing out $40
(for the new master) and $2 for a new compression bushing. (Hopefully this is worse case)

Download the Hayes manual from their site...click on the "Tech info/FAQ" caliper (lower left
corner). Bleeding is easy, just make sure to follow the instructions or you'll wind up with air in
the line, which is never a good thing.

You can familiarize yourself with the internals from my unfortunate crash
pbase.comhayes brakes&page=1Open ↗
--
Slacker

"Grippedclimer" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi, I just finished building a sweet XC bike. Test drove last week and

took it

Quoted message said:

out today and some more challenging terrain. Unfortunately, I crashed

into a

Quoted message said:

tree with my left handle bar. After some time, I noticed that my front

brake

Quoted message said:

was not working and brake fluid was running down the line. After

checking, the

Quoted message said:

line had cracked (probably when I nailed the tree) where it attaches to

the

Quoted message said:

brake lever (right at the bolt). What is the best way to repair? Can I

cut

Quoted message said:

the line, re-attach and then bleed? How do you bleed these things? I

found

Quoted message said:

nothing on the Hayes site. Any help would be appreciated (direct email

would

Quoted message said:

be great). I am gonna tear apart tonight and hopefully figure something

out so

Quoted message said:

I can ride tomorrow.

Thanks in advance,

Mike Esparza [email hidden] Albuquerque, NM

Mike,

It is on the Hayes site, I downloaded it the other day. It's under the Tech info/FAQ section of
www.hayesdiscbrake.com. It's really hard to see unless you download it. Slacker has a great
breakdown of the parts: pbase.comhayes brakes&page=1Open ↗, and the Zinn and the Art of
Mountain Bike Maintenance book has directions also (p. 139).

Hope this helps.

Lance

Sweet. Thanks guys. I did miss it the first time. Good thing it snowed today so I can work on it.

Thanks again,

Mike Esparza

(Grippedclimer) said:

Hi, I just finished building a sweet XC bike. Test drove last week and took it out today and some
more challenging terrain. Unfortunately, I crashed into a tree with my left handle bar. After some
time, I noticed that my front brake was not working and brake fluid was running down the line.
After checking, the line had cracked (probably when I nailed the tree) where it attaches to the
brake lever (right at the bolt). What is the best way to repair? Can I cut the line, re-attach and
then bleed? How do you bleed these things? I found nothing on the Hayes site. Any help would be
appreciated (direct email would be great). I am gonna tear apart tonight and hopefully figure
something out so I can ride tomorrow.

Thanks in advance,

Mike Esparza [email hidden] Albuquerque, NM

Two Words...not counting the sig

Avid Mechanicals.

The mind serves properly as a window glass rather than as a reflector, that is, the mind should give
an immediate view instead of an interpretation of the world.
:-]