Cycling Equipment · Public discussion

Dry Chain Lube?

Started by !Jones · · Last activity · 6 posts · 849 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
12 June 2008
Last activity
13 June 2008
Original author
!Jones
Posts
6
Discussion status
Public discussion
Total views
849
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. I bought a container of dry chain lubricant thinking I was getting
    generic tenacious oil; however, it looks like water. What is it?

    < It's dry chain lubricant. >

    Oh.

    Jones

  2. !Jones said:

    I bought a container of dry chain lubricant thinking I was getting
    generic tenacious oil; however, it looks like water.  What is it?

    dry lube in an evaporative carrier.

  3. In article <[email hidden]>,

    !Jones said:

    I bought a container of dry chain lubricant thinking I was getting
    generic tenacious oil;

    Why would you think that? "tenacious oil" brings to mind "sticky
    substance that attracts and holds grit", not "dry lubrication that does
    not". Are you a troll, perchance?

    Quoted message said:

    however, it looks like water. What is it?

    Generally solvent and wax. Sometimes with molybdenum disulfide or
    graphite (both black) or teflon. Then again, I suppose it could be tap
    water and clever packaging. If you are not addicted to spray cans, you
    can simply clean your chain and set it in a tin can of melted wax for a
    very effective dry lubing, cheap and no solvent needed. If you support
    the chain off the bottom of the hot wax then any additional dirt that
    comes out will fall to the bottom of the can of molten wax and stay out
    of the chain. Leave the chain in the wax long enough for the chain to
    come up to melted wax temperature, and remove the chain while it is hot
    to keep the wax amount remaining on the chain reasonable.

    --
    Cats, coffee, chocolate...vices to live by

  4. "Ecnerwal" wrote: (clip) Leave the chain in the wax long enough for the
    chain to

    Quoted message said:

    come up to melted wax temperature, and remove the chain while it is hot
    to keep the wax amount remaining on the chain reasonable.


    ^^^^^^^^^^^^^^^^^^^^^
    I used to tie my motorcycle chain to a string, and the swing the hot waxy
    chain around my head to sling off the excess.

  5. in rec.bicycles.tech Ecnerwal said:

    If you are not addicted to spray cans, you
    can simply clean your chain and set it in a tin can of melted wax for a
    very effective dry lubing,

    It depends on what's *in* the spray cans, I suppose.

    I find that my chain needs lubrication more often than I remove it.

    Jones

  6. in rec.bicycles.tech 'Leo Lichtman said:

    I used to tie my motorcycle chain to a string, and the swing the hot waxy
    chain around my head to sling off the excess.

    I think it's like "spit shining" boots in the military... I've heard
    lots of tricks. I know a chopper rider who mixes Everclear and wax,
    then ignites the mix on the chain; although, I suspect that most of it
    ends up used otherwise.

    Jones

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.