I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've managed to destroy the freehub. Since I'm too cheap to upgrade to a full 10 speed setup, I'm trying to determine my options for fixing it.
The easiest approach seems to be to install a new freehub, but I haven't been able to find one. My next option is to find a full rear hub and cannibalize the freehub from it. The issue is compatibility. I'd rather not buy one and not have it fit.
I may have a line on a Chorus rear hub of about the same vintage. Does anyone know if the Chorus freehub is compatible with Record? I'm guessing yes, but want to be sure. Could I go with a modern freehub and still use my 9 speed cassettes?
I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've managed to destroy the freehub. Since I'm too cheap to upgrade to a full 10 speed setup, I'm trying to determine my options for fixing it.
The easiest approach seems to be to install a new freehub, but I haven't been able to find one.
I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've managed to destroy the freehub. Since I'm too cheap to upgrade to a full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
The easiest approach seems to be to install a new freehub, but I haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've managed to destroy the freehub. Since I'm too cheap to upgrade to a full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
The easiest approach seems to be to install a new freehub, but I haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> Hi,
Quoted message said:
Quoted message said:
> I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > managed to destroy the freehub. Since I'm too cheap to upgrade to a > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> The easiest approach seems to be to install a new freehub, but I > haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
First click on the page, I was able to put it in my cart. Just ordered from them. Reliable. Something wrong with your internet??
Centaur quality, or perhaps you need something more expensive that'll break again? ;-)
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
For 1999 the Record freehub part number moves to FH-RE415.
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > Hi,
Quoted message said:
Quoted message said:
> > I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > full 10 speed setup, I'm trying to determine my options for fixingit.
Quoted message said:
Quoted message said:
> > The easiest approach seems to be to install a new freehub, but I > > haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
First click on the page, I was able to put it in my cart. Just ordered from them. Reliable. Something wrong with your internet??
Quoted message said:
Centaur quality, or perhaps you need something more expensive that'll break again? ;-)
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
For 1999 the Record freehub part number moves to FH-RE415.
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
-- Scott- Hide quoted text -
- Show quoted text -
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
On May 2, 3:44 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
On May 2, 2:38 pm, [email hidden] wrote:
Quoted message said:
Quoted message said:
> On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> > On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > > Hi,
Quoted message said:
Quoted message said:
> > > I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> > > The easiest approach seems to be to install a new freehub, but I > > > haven't been able to find one.
> Thanks for the pointer, but if you start looking at the sites that > come up they generally don't have the freehub in stock, thus the > question on compatibility.
First click on the page, I was able to put it in my cart. Just ordered from them. Reliable. Something wrong with your internet??
Quoted message said:
Quoted message said:
Centaur quality, or perhaps you need something more expensive that'll break again? ;-)
Quoted message said:
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
Quoted message said:
For 1999 the Record freehub part number moves to FH-RE415.
Quoted message said:
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
Quoted message said:
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
Quoted message said:
-- Scott- Hide quoted text -
Quoted message said:
- Show quoted text -
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Thanks Russell.
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
On May 2, 3:44 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> On May 2, 2:38 pm, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> > > On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > > > Hi,
Quoted message said:
Quoted message said:
> > > > I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > > > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > > > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> > > > The easiest approach seems to be to install a new freehub, but I > > > > haven't been able to find one.
> > Thanks for the pointer, but if you start looking at the sites that > > come up they generally don't have the freehub in stock, thus the > > question on compatibility.
> First click on the page, I was able to put it in my cart. Just ordered > from them. Reliable. Something wrong with your internet??
Quoted message said:
Quoted message said:
> Centaur quality, or perhaps you need something more expensive that'll > break again? ;-)
Quoted message said:
Quoted message said:
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
Quoted message said:
Quoted message said:
For 1999 the Record freehub part number moves to FH-RE415.
Quoted message said:
Quoted message said:
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
Quoted message said:
Quoted message said:
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
Quoted message said:
Quoted message said:
-- Scott- Hide quoted text -
Quoted message said:
Quoted message said:
- Show quoted text -
Quoted message said:
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Thanks Russell.
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
>>> [email hidden] wrote: >>>> I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've >>>> managed to destroy the freehub. Since I'm too cheap to upgrade to a >>>> full 10 speed setup, I'm trying to determine my options for fixing it. >>>> The easiest approach seems to be to install a new freehub, but I >>>> haven't been able to find one.
> [email hidden] wrote: >> Thanks for the pointer, but if you start looking at the sites that >> come up they generally don't have the freehub in stock, thus the >> question on compatibility.
Quoted message said:
Quoted message said:
Quoted message said:
landotter <[email hidden]> wrote: > JensonUsa's got it on closeout for $75 on that first page:http://www.jensonusa.com/store/product/ZZ311C02-Campagnolo+910+Speed+... > First click on the page, I was able to put it in my cart. Just ordered > from them. Reliable. Something wrong with your internet?? > Centaur quality, or perhaps you need something more expensive that'll > break again? ;-)
Quoted message said:
Quoted message said:
Quoted message said:
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible? For 1999 the Record freehub part number moves to FH-RE415. The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
Quoted message said:
Quoted message said:
Quoted message said:
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
Quoted message said:
Quoted message said:
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Quoted message said:
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
Campagnolo cassette bodies: Eight speed Record Ti 9 one year only 9/10 with small axle 9/10 for aluminum axle Exceptions? sure! But any modern Campagnolo nine is also a ten.
If the cassette body is cracked, you need a new one. If it's a bearing problem, those can be changed. -- Andrew Muzi <www.yellowjersey.org/> Open every day since 1 April, 1971 ** Posted from http://www.teranews.com **
>>>> [email hidden] wrote: >>>>> I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've >>>>> managed to destroy the freehub. Since I'm too cheap to upgrade to a >>>>> full 10 speed setup, I'm trying to determine my options for fixing it. >>>>> The easiest approach seems to be to install a new freehub, but I >>>>> haven't been able to find one. >>> landotter <[email hidden]> wrote: >>>>http://tinyurl.com/6jtm5v >> [email hidden] wrote: >>> Thanks for the pointer, but if you start looking at the sites that >>> come up they generally don't have the freehub in stock, thus the >>> question on compatibility. > landotter <[email hidden]> wrote: >> JensonUsa's got it on closeout for $75 on that first page:http://www.jensonusa.com/store/product/ZZ311C02-Campagnolo+910+Speed+... >> First click on the page, I was able to put it in my cart. Just ordered >> from them. Reliable. Something wrong with your internet?? >> Centaur quality, or perhaps you need something more expensive that'll >> break again? ;-) [email hidden] wrote: > Don't need anything more expensive, if it'll fit. See the original > question on compatibility. According to the campy spares catalogs, > the part numbers are different. For my Record hub the part number for > the freehub is FH-RE315. For the Chorus version the same year it's FH- > CH115. Are they compatible? > For 1999 the Record freehub part number moves to FH-RE415. > The same is true for your Centaur pointer. In the 2001 Spares catalog > it shows multiple numbers for the freehub with 3 different part > numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- > DA015. To me that says the Centaur freehub is compatible with FH- > RE415. > I will contact Jenson to see what Campy part number their hub is, but > I'm guessing I'm still going to be asking the same compatibility > question. Any ideas?
Quoted message said:
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Quoted message said:
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
Quoted message said:
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
Campagnolo cassette bodies: Eight speed Record Ti 9 one year only 9/10 with small axle 9/10 for aluminum axle Exceptions? sure! But any modern Campagnolo nine is also a ten.
If the cassette body is cracked, you need a new one. If it's a bearing problem, those can be changed. -- Andrew Muzi <www.yellowjersey.org/> Open every day since 1 April, 1971 ** Posted fromhttp://www.teranews.com**
Thanks for the reply.
It is bearing related inside of the freehub. Not the sealed bearings on the outer side of the freehub, but there are pieces of bearings floating around on the inside. I believe that the body is intact. But if there were races inside, I don't think they are there any more. I do still have all of the parts.
The pawls also seem to be fine.
It may be worth a shot at trying to fix it. I am in Madison and may stop by. I'll be the one with the box that rattles.
I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've managed to destroy the freehub. Since I'm too cheap to upgrade to a full 10 speed setup, I'm trying to determine my options for fixing it.
The easiest approach seems to be to install a new freehub, but I haven't been able to find one. My next option is to find a full rear hub and cannibalize the freehub from it. The issue is compatibility. I'd rather not buy one and not have it fit.
I may have a line on a Chorus rear hub of about the same vintage. Does anyone know if the Chorus freehub is compatible with Record? I'm guessing yes, but want to be sure. Could I go with a modern freehub and still use my 9 speed cassettes?
Thanks
-- Scott
ti axle? Freehub bodies are available from QBP, about $125. The 9s freehub is compatible with Campag 10s cogsets.
On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> Hi,
Quoted message said:
Quoted message said:
> I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > managed to destroy the freehub. Since I'm too cheap to upgrade toa > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> The easiest approach seems to be to install a new freehub, but I > haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
First click on the page, I was able to put it in my cart. Just ordered from them. Reliable. Something wrong with your internet??
Centaur quality, or perhaps you need something more expensive that'll break again? ;-)
If it's 'Centaur', it's the wrong freehub body for the 1998 Record hub. Centaur freehub body went on the 1999 and later aluminum axled hubs. 1998, Record and Chorus hubs used a ti or steel axle, diffeent freehub body.
On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > Hi,
Quoted message said:
Quoted message said:
> > I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > full 10 speed setup, I'm trying to determine my options for fixingit.
Quoted message said:
Quoted message said:
> > The easiest approach seems to be to install a new freehub, but I > > haven't been able to find one.
Thanks for the pointer, but if you start looking at the sites that come up they generally don't have the freehub in stock, thus the question on compatibility.
First click on the page, I was able to put it in my cart. Just ordered from them. Reliable. Something wrong with your internet??
Quoted message said:
Centaur quality, or perhaps you need something more expensive that'll break again? ;-)
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
Yes, either and for the ti or steel axled hubs.
Quoted message said:
For 1999 the Record freehub part number moves to FH-RE415.
For aluminum axled hubs, NOT steel or titanium.
Quoted message said:
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
See above, starting in 1999/2000 the top three hubs had the aluminum axled, all are intercompatible.
Quoted message said:
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
On May 2, 3:44 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> On May 2, 2:38 pm, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> > > On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > > > Hi,
Quoted message said:
Quoted message said:
> > > > I've got a Campy Record 9 Speed rear hub, circa 1998, on whichI've > > > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > > > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> > > > The easiest approach seems to be to install a new freehub, butI > > > > haven't been able to find one.
> > Thanks for the pointer, but if you start looking at the sites that > > come up they generally don't have the freehub in stock, thus the > > question on compatibility.
> First click on the page, I was able to put it in my cart. Just ordered > from them. Reliable. Something wrong with your internet??
Quoted message said:
Quoted message said:
> Centaur quality, or perhaps you need something more expensive that'll > break again? ;-)
Quoted message said:
Quoted message said:
Don't need anything more expensive, if it'll fit. See the original question on compatibility. According to the campy spares catalogs, the part numbers are different. For my Record hub the part number for the freehub is FH-RE315. For the Chorus version the same year it's FH- CH115. Are they compatible?
Quoted message said:
Quoted message said:
For 1999 the Record freehub part number moves to FH-RE415.
Quoted message said:
Quoted message said:
The same is true for your Centaur pointer. In the 2001 Spares catalog it shows multiple numbers for the freehub with 3 different part numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- DA015. To me that says the Centaur freehub is compatible with FH- RE415.
Quoted message said:
Quoted message said:
I will contact Jenson to see what Campy part number their hub is, but I'm guessing I'm still going to be asking the same compatibility question. Any ideas?
Quoted message said:
Quoted message said:
-- Scott- Hide quoted text -
Quoted message said:
Quoted message said:
- Show quoted text -
Quoted message said:
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Thanks Russell.
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
The axle diameters are the same for Chorus and Record in 1998, one ti and one steel, both 12mm, as long as the axles are not aluminum.
Quoted message said:
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
> On May 2, 3:44 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> > On May 2, 2:38 pm, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > > On May 2, 1:34 pm, landotter <[email hidden]> wrote:
Quoted message said:
Quoted message said:
> > > > On May 2, 10:49 am, [email hidden] wrote:
Quoted message said:
Quoted message said:
> > > > > Hi,
Quoted message said:
Quoted message said:
> > > > > I've got a Campy Record 9 Speed rear hub, circa 1998, on which I've > > > > > managed to destroy the freehub. Since I'm too cheap to upgrade to a > > > > > full 10 speed setup, I'm trying to determine my options for fixing it.
Quoted message said:
Quoted message said:
> > > > > The easiest approach seems to be to install a new freehub, but I > > > > > haven't been able to find one.
> > > Thanks for the pointer, but if you start looking at the sites that > > > come up they generally don't have the freehub in stock, thus the > > > question on compatibility.
> > First click on the page, I was able to put it in my cart. Just ordered > > from them. Reliable. Something wrong with your internet??
Quoted message said:
Quoted message said:
> > Centaur quality, or perhaps you need something more expensive that'll > > break again? ;-)
Quoted message said:
Quoted message said:
> Don't need anything more expensive, if it'll fit. See the original > question on compatibility. According to the campy spares catalogs, > the part numbers are different. For my Record hub the part number for > the freehub is FH-RE315. For the Chorus version the same year it's FH- > CH115. Are they compatible?
Quoted message said:
Quoted message said:
> For 1999 the Record freehub part number moves to FH-RE415.
Quoted message said:
Quoted message said:
> The same is true for your Centaur pointer. In the 2001 Spares catalog > it shows multiple numbers for the freehub with 3 different part > numbers: (Record) FH-RE415, (Chorus) FH-CH215, and (Centaur) FH- > DA015. To me that says the Centaur freehub is compatible with FH- > RE415.
Quoted message said:
Quoted message said:
> I will contact Jenson to see what Campy part number their hub is, but > I'm guessing I'm still going to be asking the same compatibility > question. Any ideas?
Quoted message said:
Quoted message said:
> -- Scott- Hide quoted text -
Quoted message said:
Quoted message said:
> - Show quoted text -
Quoted message said:
Quoted message said:
I ruined the freehub body internals and axle on a 1998 Chorus rear hub. Bought a 1997 Shamal rear wheel and transferred the freehub and titanium axle into the 1998 rear hub shell and it works perfectly well. Built up the rim with a 36 spoke Veloce hub and I now have a "matching" set of Shamal 12 spoke wheels. In 1998, any Chorus or Record freehub body and axle and bearings will be interchangeable. In 1999 Campagnolo went to the oversized aluminum axle in its Chorus and Record so compatibility would be an issue for most stuff since then. Maybe early 2000s Daytona, Veloce, Athena, Centaur might work. Maybe. But your 1998 cup and cone threaded axle should work with 1998 and earlier bodies.
Quoted message said:
Thanks Russell.
Quoted message said:
I did contact Jenson and they said the Centaur freehub body they had wouldn't work. The explanation as to why the 1999 and beyond freehubs won't work makes sense. In looking at the 1998 parts catalog, the axles for the Record vs. Chorus are different as well. Wish I could tell if the diameters are the same.
The axle diameters are the same for Chorus and Record in 1998, one ti and one steel, both 12mm, as long as the axles are not aluminum.
Quoted message said:
If I decide to rebuild the wheel around a new 10 speed hub, with a new 10 speed cassette, will it work without changing my shifters and rear derailleur? My thought is that I wouldn't be able to shift into the highest cog of the cassette. Correct?
Quoted message said:
Thanks
Quoted message said:
-- Scott
Thanks for the information. I took it in to see if it could be fixed. If not I'll start investigating other alternatives.
