Velocity rims - Are they any good?
Thanks,
sam
A community for cyclists, gear, training and racing.
Australia and New Zealand · Public discussion
This thread is locked and is currently read-only.
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Velocity rims - Are they any good?
Thanks,
sam
Quoted message said:Velocity rims - Are they any good?
Thanks,
sam
Who's asking, and why?
Quoted message said:Velocity rims - Are they any good?
Thanks,
sam
They fell apart on the MTB I would not use them again. I use Mavic.
<[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Velocity rims - Are they any good?
The factory's just around the corner from me so being a local product they
must be good. All the hipsters can't get enough of the Deep V's so they've
got street cred too!
I have a 26" rear one with a 8 spd cassette hub that I've never used if you
want to make me an offer. It owes me about $120.00. I originally bought it
because I kept blowing Shimano freehubs but the manufacturer has since
upgraded that part for me and it's been fine since. I also broke the
velocity hub and they replaced the whole wheel but I've never had a need to
use it since the Shimano one has been holding up. Now I ride single speed
anyway.
--
www.ozcableguy.com
www.oztechnologies.com
OzCableguy said:<[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Velocity rims - Are they any good?
The factory's just around the corner from me so being a local product they
must be good.
Although for some inexplicable reason.. they're very hard to find
locally at a reasonable price. A shed-load cheaper in the US...
Which is why I didn't bother buying one when I made a rear wheel
recently, even though I went to the LBS specifically looking for one
of their aeroheads.
duncan
"Rob." <[email hidden].> wrote in message
news:[email hidden]...
Quoted message said:[email hidden] wrote:
They fell apart on the MTB I would not use them again. I use Mavic.
From
http://bikesnobnyc.blogspot.com/2008/04/bsnyc-department-of-ichthyology-leaping.html
Mavic: "Our Wheels Explode! Boom!"
http://bp0.blogger.com/_urSQl6wUA5g/R8778SarJ6I/AAAAAAAABXY/l9vYYjxCosQ/s1600-h/14.jpg
http://farm4.static.flickr.com/3229/2290220764_e3cab03370.jpg?v=0
or in tinyurl format:
http://tinyurl.com/3atk3u
http://tinyurl.com/6qc4yf
;-)
--
www.ozcableguy.com
www.oztechnologies.com
Duncan said:OzCableguy said:<[email hidden]> wrote in message
Quoted message said:news:[email hidden]...
Quoted message said:Quoted message said:Velocity rims - Are they any good?
Quoted message said:The factory's just around the corner from me so being a local product they
must be good.Although for some inexplicable reason.. they're very hard to find
locally at a reasonable price. A shed-load cheaper in the US...Which is why I didn't bother buying one when I made a rear wheel
recently, even though I went to the LBS specifically looking for one
of their aeroheads.duncan
I was quoted $115 for a locally made Velocity rim. The same rim is in
the US for USD$49 - with freight it is about the same - go figure.
BTW the OP seems to be a troll.
Donga
Rob.' . said:Quoted message said:Velocity rims - Are they any good?
Thanks,
samThey fell apart on the MTB I would not use them again. I use Mavic.
They're bullet-proof on our tandem and I'd use them again anytime.
Bizarrely, the cheapest pair I've ever seen were in a bike shop in
Reading in the UK.
Adrian
OzCableguy said:"Rob." <[email hidden].> wrote in message
news:[email hidden]...Quoted message said:[email hidden] wrote:
They fell apart on the MTB I would not use them again. I use Mavic.
From
http://bikesnobnyc.blogspot.com/2008/04/bsnyc-department-of-ichthyology-leaping.htmlMavic: "Our Wheels Explode! Boom!"
http://bp0.blogger.com/_urSQl6wUA5g/R8778SarJ6I/AAAAAAAABXY/l9vYYjxCosQ/s1600-h/14.jpg
http://farm4.static.flickr.com/3229/2290220764_e3cab03370.jpg?v=0or in tinyurl format:
http://tinyurl.com/3atk3u
http://tinyurl.com/6qc4yf;-)
This is well and good but the velocity rims that were on my MTB broke -
due to poor design. Note rims and not spokes. Also I think there too heavy.
Rob. said:
This is well and good but the velocity rims that were on my MTB broke -
due to poor design. Note rims and not spokes. Also I think there too
heavy.
I own three sets of Velocity rims.
I have a set of HEAVY DUTY Dyad rims on my touring bike. Yes they are
heavy. They are the right rims for laden touring, and I wouldn't
hesitate to ride off a cliff with them. Never broken a spoke. Never had
to true them since my brother built them six years ago.
I have a pair of Deep V in 700C which are my every day rims on the
touring bike when I don't have panniers and all that weight or when I
know it is going to be smooth bitumen. Probably true them a little every
couple of years. Never broken a spoke. I built these around nine years ago.
I have a pair of Deep V in 26" on my hardtail which have taken a heap of
punishment since I built them (over 10 years) without breaking a spoke.
Very strong wheels without too much weight.
YMMV.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.