CyclingForums
A community for cyclists, gear, training and racing.
Power meters · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
While starting to download todays data from my PT Pro via WKO+, I got an error and now can not establish a link between the WKO+ client and the device. The PT CPU will not poweroff and remains in "host" mode. Anybody else had this happen and what is the best course of action?
Update:
I wound up removing the battery to reset the unit. Data was persisted to flash memory so no problem. Thanks anyway.
fleshbroiler said:Update:
I wound up removing the battery to reset the unit. Data was persisted to flash memory so no problem. Thanks anyway.
When I remove the battery from my computers, I loose all the data. How long was your battery out of the holder?
Steve_B said:
When I remove the battery from my computers, I loose all the data. How long was your battery out of the holder?
Just long enough to power down the CPU, 10 seconds tops and that long only because I dropped the battery. After replacing the battery cap and powering the CPU back on, the unit will appear to be cleared; ET, Dist, Max & Avg watts, etc, all zero. I put the CPU back in the bike cradle and spun the cranks a couple of times then proceeded normally. I'm not sure if that last step is necessary, I hope to hear from one of the PT gurus.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.