CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
This thread is locked and is currently read-only.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I am installing a SRAM Rival group on my Cannondale Synapse frame. When setting the b screw on the rear derailleur to the recommended 6mm (standard 11-23 cassette) smallest gap I can get btw the cluster and the jockey wheels is about 10mm or more. This is with the b screw at the minimum extent.
Does anyone have any experience with these units and can I expect normal shifting?
jwb_onz said:I am installing a SRAM Rival group on my Cannondale Synapse frame. When setting the b screw on the rear derailleur to the recommended 6mm (standard 11-23 cassette) smallest gap I can get btw the cluster and the jockey wheels is about 10mm or more. This is with the b screw at the minimum extent.
Does anyone have any experience with these units and can I expect normal shifting?
yes and yes.......too little clearance makes for noise, a wee bit too large won't mean anything.
Peter@vecchios said:yes and yes.......too little clearance makes for noise, a wee bit too large won't mean anything.
thanks for the feedback. looking forward to trying out the new gear this weekend.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.