Help with broken saddle

You're doing great if you're surviving sitting on that!

(For all you kids out there, yes, that's what lots of us unicyclists
had to deal with in the 70s and 80s!)

You can ask around at local bike shops, but they are unlikely to have
anything unless they've been in business a long time and are the kind
who keep old inventory on hand. That would be your cheapest bet, but
not including all the time and gas to go to the shops. Or you could try
calling.

If you can find some other unicyclists in your area, they might have
old saddles they could sell you cheap, or even give you. If you lived
near me I'd say come over and I'd hand you something better than that
as I have lots of old parts.

The Classic saddle from Unicycle.com won't fit your post, you'd have to
get a post also. Same goes for any new saddle that won't suck. You
could buy the savage saddle, but why replace with something similar to
what you've already got?

If you like do-it-yourself, you could try making something yourself,
using wood for a base, some foam and some denim or vinyl fabric for a
cover, but that could be a lot of work to get it right. My
recommendation is the Nimbus Gel, or high-top saddle (either one) and a
post to go with it. You'll just have to measure the post you have,
which is probably 7/8" but you'll need to make sure. New posts come in
metric sizes, which would most likely be 'one of these'
(http://www.unicycle.com/shopping/shopexd.asp?id=271) (22.2mm).

Another possibility is to buy another old unicycle, which can always be
found on eBay, but by the time you get it shipped to you you'll
probably end up paying more anyway. Your unicycle is fine, but it's
useless if nobody wants to sit on it. A seat is a great investment, as
it can be a learning cycle forever, even if people move onto better
models later on.

--
johnfoss

John Foss
Email: "jfoss" at "unicycling.com" -- www.unicycling.com
-----------------------------------------------

Man with broken collar bone say: "Have you checked your shoelaces
lately?"
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

haha wow that looks like possibly the least comfortable seat I have seen
yet.

I have the seat that came from my learner that I don't use anymore and
will send it your way. It's one of the steel based vinyl covered ones
and I converted it to an air saddle. Throw me a PM with your mailing
address and I will send it to you it you want. You would still need to
buy a new post as this seat has the standard 4-bolt pattern.

--
saskatchewanian
------------------------------------------------------------------------
saskatchewanian's Profile: http://www.unicyclist.com/profile/14180
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

saskatchewanian, thanks for the offer. I just sent you a PM. Hopefully
shipping won't be that expensive from Canada. Let me know so I can see
if it is reasonable and paypal you for the expense.

John thanks for the advice. It seems like you had a lot of the same
thoughts that I did.

It looks like I will still need to get a new seat post. Does anyone
know of a shop near Maryland that would carry a 22.2mm standard 4-bolt
seat post?

--
lauraz
------------------------------------------------------------------------
lauraz's Profile: http://www.unicyclist.com/profile/15410
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

lauraz said:

It looks like I will still need to get a new seat post. Does anyone
know of a shop near Maryland that would carry a 22.2mm standard 4-bolt
seat post?

Try 'unicycle.com' (http://www.unicycle.com/). I think their
'seatposts' (http://tinyurl.com/4w2l) run about $10. They also have a
selection of 'saddles' (http://tinyurl.com/fg8) you can look through,
some as low as $19.

--
harper

-Greg Harper

*jc is the only main man. there can be no other.*
------------------------------------------------------------------------
harper's Profile: http://www.unicyclist.com/profile/426
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Laura,

I have a seat post (with seat) from an old Schwinn unicycle. It
measures about 20 mm in diameter. I don't know if that will work. I
live in Germantown, MD. You are welcome to have it.

Claude

--
munimag
------------------------------------------------------------------------
munimag's Profile: http://www.unicyclist.com/profile/16425
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I found a seatpost also and have everything pacaged up but was waiting
for another person to give me payment for some stuff that I am selling
him, then was going to send him his package and Laura hers at the same
time, saving myself a trip to the post office. This hasn't happened yet
so I am thinking that Munimag, since you are in the same state yours
would get there much faster.

Once that other guy pays me I will send the package unless you send
yours first 🙂

--
saskatchewanian
------------------------------------------------------------------------
saskatchewanian's Profile: http://www.unicyclist.com/profile/14180
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Thanks munimag, I will send you a PM to get some details. A 20mm post
may work with a shim.

saskatchewanian, I will let you know if this work out since he is much
closer.

--
lauraz
------------------------------------------------------------------------
lauraz's Profile: http://www.unicyclist.com/profile/15410
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Its heart warming to see the unicycling community helping each other out
like this.

Good job every one.

--
legtod2
------------------------------------------------------------------------
legtod2's Profile: http://www.unicyclist.com/profile/15732
View this thread: http://www.unicyclist.com/thread/66868

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com