To patch or not to patch...

I'm not sure how tight a CC is on a KH rim but to get my Luna off a DX32
I needed to get some good quality tire levers. The plastic ones broke
and the cheep steel ones scratch your rim so I use levers with a steel
core and plastic outside.

Make sure that you unseat your bead by pushing it towards the center of
the rim where there is a bit of a dip giving you more room to work.

Having a spare tube is never a bad Idea, swapping tubes is faster than
fixing. I tend to swap a punctured tube with a good one if I want to go
riding again right away, then patch the punctured tube after the ride
so i have a spare again for next time.

I would suggest against the slime stuff because in my experience it
just makes a mess when you really blow your tube and it degrades rubber
over time.

After typing this little blurb up I remembered that the almighty
'Sheldon Brown' (http://sheldonbrown.com/flats.html) would surely have
an article on this

Peace

ERIC

--
saskatchewanian

john_childs said:

The difference between 1.5 meters and 6 feet is just to do with the
exchange rate. 1.5 Canadian meters are now worth 6 US feet.

------------------------------------------------------------------------
saskatchewanian's Profile: http://www.unicyclist.com/profile/14180
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I will give you the secret, USE DISH SOAP!

If the tire is hard to get off, Dish Soap seems to work miracles.

I have a stiff DH tire on my bike with a DX32 in the back and it's a
pain to get on and off, so I started using dish soap. My rim is chewed
though, so I just use a big spanner for a router or saw of some kind as
a tire lever.

--
Borgschulze

'deviantART'
(http://borgschulze.deviantart.com/)'Gravity'
(http://videos.observedtrials.net/Gravity.wmv) is -not- the
issue.
------------------------------------------------------------------------
Borgschulze's Profile: http://www.unicyclist.com/profile/13501
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Well what can I say... I've never had trouble getting my CC off my KH20
besides, you only need to get half off to fix a puncture anyway - 5 min
job!

--
jamessd

My videos:
http://uk.youtube.com/watch?v=WpBvnO6wVG0#GU5U2spHI_4

http://uk.youtube.com/watch?v=mtnedg1YS8c
Add me: [email hidden]
------------------------------------------------------------------------
jamessd's Profile: http://www.unicyclist.com/profile/15102
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I've had quite a few tires that are hard to get off, or hard to put on a
rim. This is the method that I use.

Make sure that all the air is out of the tube ( if its punctured you
can skip this step ).

Place your tire on your lap and move the bead of the tire to the center
of the rim, start at the valve stem and work out on both sides at the
same time.

When you get to the opposite side of the rim take your tire levers and
pull the bead off the rim, sometimes you need to use both levers, other
times one lever will do the job no problem. If it is really stuck on
the rim try working the levers in oppisite directions untill the bead
pops off.

When putting your trie back on, first try to force the bead on with
just your hands, if you can avoid using levers you should as there is a
chance you can grab your tube and cause a flat in the process. As
someone said some hand soap or shampoo can also help as a lubercate
between your tire and the rim.

And never use that slime, it makes a HUGE mess.

Chex

--
Checkernuts

No one said it was gonna be easy and I'm not afraid to try, with the
odds stacked up against me I will have to fight, One Life One Wheel got
to do it right. H2O

* -------muni militia -------
one wheeled death squad*
------------------------------------------------------------------------
Checkernuts's Profile: http://www.unicyclist.com/profile/801
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Alrighty, I just bought a new tube and replaced it.
The guy at the hardware store told me to put all the bead to one side,
then just pull it up and off with your hands.
To my surprise, it actually worked. No levers, no soap. Just using my
hands, I replaced my CC tire and it wasn't very hard to do. 🙂

Thanks for all the advice though. I didn't buy the slime. Right now,
I'm just cleaning and regreasing parts of my uni and then I'll be ready
to go. 😄

--
CoreTechs

Quoted message said:

<> UNICYCLE FOR CHRIST<><

And get 'LOST' (www.lost.eu/69d9c).
------------------------------------------------------------------------
CoreTechs's Profile: http://www.unicyclist.com/profile/15629
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

CoreTechs said:

Alrighty, I just bought a new tube and replaced it.
The guy at the hardware store told me to put all the bead to one side,
then just pull it up and off with your hands.
To my surprise, it actually worked. No levers, no soap. Just using my
hands, I replaced my CC tire and it wasn't very hard to do. 🙂

Thanks for all the advice though. I didn't buy the slime. Right now,
I'm just cleaning and regreasing parts of my uni and then I'll be ready
to go. 😄

You have a KH though right? KH rim has depth to it, and it is easy to
get tires off and onto that rim, along with Qu-Ax, and Koxx.

Torker however, uses a Alex DX32. That rim has a very square profile,
making it very hard to get the tire off. I have to use three of my tiny
plastic levers, and dish soap on it. With my KH rim, I can pull the
tire off so easily.

--
Jerrick

~*~!I ride for Christ, Fun, Challenges, and a lot
more!~*~
'!Gallery!' (http://tinyurl.com/gf2g9)
'!MRIS!' (http://tinyurl.com/jjjnz)
'Easy Tire Removal Guide.' (http://tinyurl.com/rd9ru)
My sponsor '~!SIXSIXONE!~' (http://sixsixone.com/)
------------------------------------------------------------------------
Jerrick's Profile: http://www.unicyclist.com/profile/11632
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

everything is better with lube😄

--
gabetheunicycleman

Quotes from ACA
"two out of three of our children are directly involved with selling
drugs..."
"50% of all reproductive problems are because of the man..."😄 and
from my mum "is titanium strong?"
------------------------------------------------------------------------
gabetheunicycleman's Profile: http://www.unicyclist.com/profile/13054
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

poor some boiling water on it, that makes the rubber much more flexxible
and the tube will come off real easy. Also patches are the way forward,
only cahnge the tube if u cant find the hole or if ur patches screw up

--
brendan

'--- CLICK ME ---' (www.lost.eu/6b72e)
------------------------------------------------------------------------
brendan's Profile: http://www.unicyclist.com/profile/13680
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

motocycle tubes= awesome 🙂
you don't have to worry about this stuff 🙂
i have pinch flatted a tire once since i started using them a few
months back, and that was off a 12 set... i'm happy with them and they
work great! i ride through sticker burrs and occasionally thorns and
have yet to get a flat because of them. motorcycle tubes are the way
to go!!!!

PS the tube size for a trials unicycle is going to be a 15x2.5-2.75 or
15x2.75-3.0(i have yet to see one, please link if you find/found one)

the tube size for a 24" MUNI tire would be a 20"x2.75
they are awesome tubes compared to the bicycle tubes and are much
higher quality, and lighter!

--
skrobo

Quoted message said:

<> Unicycle For Christ <><

'MY VIDEOS-for enjoyment purposes mostly'
(http://www.youtube.com/profile?user=skroboskim)

The UniSLAB said:

don't worry about those little clown tricks called flips and wrap
arounds. We don't dance with our unis, we jump them[over trucks]

sutton629 said:

I honestly have a hard time believing that you are really a white guy

------------------------------------------------------------------------
skrobo's Profile: http://www.unicyclist.com/profile/12272
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

saskatchewanian said:

I'm not sure how tight a CC is on a KH rim but to get my Luna off a DX32
I needed to get some good quality tire levers. The plastic ones broke
and the cheep steel ones scratch your rim so I use levers with a steel
core and plastic outside.

I just use the normal steel ones, but I put tape around it so that it
wouldn't scratch my rim.

--
Matt_V

-Matt😄
My msn: [email hidden] - Add me if you wish
|'New Uni' (http://tinyurl.com/39mt6k)|
<|First Video:'Ready to Fall'
(http://www.unicyclist.com/forums/showthread.php?t=64604)|>
------------------------------------------------------------------------
Matt_V's Profile: http://www.unicyclist.com/profile/14671
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Matt_V said:

I just use the normal steel ones, but I put tape around it so that it
wouldn't scratch my rim.

Man I wish I would have thought of that. I just went for it and now I
have a black rim with small scratches where I cranked down on it with
the tire irons. Definatley doing that next time.

But yeah scrobo is right. Get a motorcycle tube and don't worry about a
thing.

--
The UniSLAB

skrobo said:

yeah drilled koxx scare me

torkerdx said:

your funny
but you might get lucky

------------------------------------------------------------------------
The UniSLAB's Profile: http://www.unicyclist.com/profile/15258
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

The UniSLAB said:

Man I wish I would have thought of that. I just went for it and now I
have a black rim with small scratches where I cranked down on it with
the tire irons. Definatley doing that next time.

But yeah scrobo is right. Get a motorcycle tube and don't worry about a
thing.

My first try was with a lever and scratched it a bit so I decided
against using it. I covered the scratch with an industrial black paint
marker. Not noticeable at all now

What kind of store would I get a motorcycle tube or should I just get
one online?
How much do they generally cost?

--
CoreTechs

Quoted message said:

<> UNICYCLE FOR CHRIST<><

And get 'LOST' (www.lost.eu/69d9c).
------------------------------------------------------------------------
CoreTechs's Profile: http://www.unicyclist.com/profile/15629
View this thread: http://www.unicyclist.com/thread/65818

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com