Disc brake guide?

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi,

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

be.

Thanks

Hope make cable guides that fit in those holes in the fork, I suppose they would fit in the rear!;

cgi.ebay.co.ukeBayISAPI.dllOpen ↗

Quoted message said:

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

be.

Thanks

Daz

Don't bother. Just use two zip ties; One around the seat/chainstay and loop the other one
underneath, then around the hose... pull tight and cut off excess.

Use as many as you need. Large, med, small, multiple colors... wherever you need them and
they're cheap.

--
Slacker

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi,

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗ es&ModelID=245

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

be.

Thanks

Daz

Versatile cable guides are found here:

9thtee.comzipties.htmOpen ↗

Unless your building the bike to be looked at, do it up zip-tie style.

Chris

Quoted message said:

Hope make cable guides that fit in those holes in the fork, I suppose they would fit in the rear!;

Damn, you got there before me, though would it not be best to just wrap the hose around the rear
seat stay so that it had a good line

--
===========================================================

Find him and kill him.

UNLEASH THE HAMSTERS!

mtb-bikes.commtb-bikes.comOpen ↗

Heh, heh, that's what I did!

--
- Zilla Cary, NC (Remove XSPAM)

"Chris Garwood" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Quoted message said:

Hope make cable guides that fit in those holes in the fork, I suppose

they

Quoted message said:

Quoted message said:

would fit in the rear!;

Damn, you got there before me, though would it not be best to just wrap the hose around the rear
seat stay so that it had a good line

--
===========================================================

Find him and kill him.

UNLEASH THE HAMSTERS!

mtb-bikes.commtb-bikes.comOpen ↗

Daz N said:

Hi,

I'm looking for something that will screw into the rear canti hole and allow me to run the disc
brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗

But that will screw into the rear hole where the canti pivot points used to be.

chainreactioncycles.comviewproduct.aspOpen ↗

"bomba" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Daz N said:

Hi,

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗ es&ModelID=245

Quoted message said:

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

Quoted message said:

be.

chainreactioncycles.comviewproduct.aspOpen ↗ es&ModelID=2492

Quoted message said:

Hehehe... Beautiful. ;^)

"Michael Dart" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

"bomba" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Daz N said:

Hi,

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗

Quoted message said:

es&ModelID=245

Quoted message said:

Quoted message said:

But that will screw into the rear hole where the canti pivot points

used

Quoted message said:

to

Quoted message said:

Quoted message said:

be.

chainreactioncycles.comviewproduct.aspOpen ↗

Quoted message said:

es&ModelID=2492

Quoted message said:

Hehehe... Beautiful. ;^)

They are nice, and what I have on my fork.

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

Hi,

[snip]

Quoted message said:

But that will screw into the rear hole ...

Uhhh, isn't this Alert Level Pink for Sorni?

Dammit, Bill, I'm tired of you sleeping on the job. Who do you think you are, the a.m-b moderator?
--
Jonesy

"Jonesy" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message

news:<[email hidden]>...

Quoted message said:

Quoted message said:

Hi,

[snip]

Quoted message said:

But that will screw into the rear hole ...

Uhhh, isn't this Alert Level Pink for Sorni?

Dammit, Bill, I'm tired of you sleeping on the job. Who do you think you are, the a.m-b moderator?

I saw it, I saw it. (Actually, I noticed the line "I'm looking for something that will screw into
the rear canti hole." Aren't we all.)

Bill "and I question the color of your alert level" S.

"Sorni" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

"Jonesy" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message

news:<[email hidden]>...

Quoted message said:

Quoted message said:

Hi,

[snip]

Quoted message said:

But that will screw into the rear hole ...

Uhhh, isn't this Alert Level Pink for Sorni?

Dammit, Bill, I'm tired of you sleeping on the job. Who do you think you are, the a.m-b
moderator?

I saw it, I saw it. (Actually, I noticed the line "I'm looking for something that will screw into
the rear canti hole." Aren't we all.)

LOL. I knew I could count on you...

Quoted message said:

Bill "and I question the color of your alert level" S.

Not that there's anything wrong with that.
--
Jonesy

"Selwonk" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Daz N" <(REMOVE-NOSPAM)[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi,

I'm looking for something that will screw into the rear canti hole and

there are 2 sizes though, fronts are m8 rears are m10, or some such. ive just fitted hope ones to my
bike. look nice

panda

Quoted message said:

allow

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗ es&ModelID=245

Quoted message said:

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

be.

Thanks

Hope make cable guides that fit in those holes in the fork, I suppose they would fit in the rear!;

cgi.ebay.co.ukeBayISAPI.dllOpen ↗ 7

"Zilla" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Heh, heh, that's what I did!

"Chris Garwood" <[email hidden]> wrote in message news:3fd24b14$1_2@mk-nntp-
2.news.uk.tiscali.com...

Quoted message said:

Quoted message said:

Hope make cable guides that fit in those holes in the fork, I suppose

they

Quoted message said:

Quoted message said:

would fit in the rear!;

Damn, you got there before me, though would it not be best to just wrap the hose around the rear
seat stay so that it had a good line

You lot - WTF is wrong with cable ties? Bunch o' bloody posers.

Shaun aRe

"Slacker" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Quoted message said:

I'm looking for something that will screw into the rear canti hole and

allow

Quoted message said:

me to run the disc brake hose (if that makes sense?)

A bit like these:-

chainreactioncycles.comviewproduct.aspOpen ↗

Quoted message said:

Quoted message said:

But that will screw into the rear hole where the canti pivot points used

to

Quoted message said:

be.

Thanks

Daz

Don't bother. Just use two zip ties; One around the seat/chainstay and

loop

Quoted message said:

the other one underneath, then around the hose... pull tight and cut off excess.

Use as many as you need. Large, med, small, multiple colors... wherever

you

Quoted message said:

need them and they're cheap.

Bingo! Common sense at last, heheheheh...

Shaun aRe - I use bright yellow ones myself! Ahem.

"Shaun Rimmer" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Zilla" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Heh, heh, that's what I did!

"Chris Garwood" <[email hidden]> wrote in message news:3fd24b14$1_2@mk-nntp-
2.news.uk.tiscali.com...

Quoted message said:

> Hope make cable guides that fit in those holes in the fork, I

suppose

Quoted message said:

Quoted message said:

they

Quoted message said:

> would fit in the rear!;

Damn, you got there before me, though would it not be best to just

wrap

Quoted message said:

Quoted message said:

Quoted message said:

the hose around the rear seat stay so that it had a good line

You lot - WTF is wrong with cable ties? Bunch o' bloody posers.

Who needs'em when your braze-ons are disc specific.