Frame painter recommendations

Jeff Kwapil said:

My trusty Trek 420 has more than its share of scratches. I may have it repainted.

If you had an excellent frame-finishing experience, please post contact info for those
responsible.

A couple that have been recommended to me:

Joe Bell Bicycle Refinishing 3735 Kenora Dr., Suite C Spring Valley, CA 91977
(619) 469-4312 campyonly.comjoebell.htmlOpen ↗

CyclArt 2590 Pioneer Ave. Suite A Vista, CA 92083-8427. Phone 760-599-1015. Fax 760-599-1017
cyclart.comcyclart.comOpen ↗

These painters do heirloom quality work, and that may be overkill from both and aesthetic and
monetary perspective for your "trusty" bike. I would consider having it powdercoated, which is
allegedly a more durable coating. There are several websites that do bicycle specific powdercoating,
but you might have a generic powdercoater in your area that could do it too.

Here's one that is not bicycle specific, but does bicycles pretty cheaply.

procoatings.comprocoatings.comOpen ↗

Wayne

I wish to repaint my 1988 Trek 420.

Are decals available? I hate to say, but Trek did not reply to my email.

Love Trek bikes, Jeff

"Jeff Kwapil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

My trusty Trek 420 has more than its share of scratches. I may have it repainted.

If you had an excellent frame-finishing experience, please post contact

info

Quoted message said:

for those responsible.

A couple that have been recommended to me:

Joe Bell Bicycle Refinishing 3735 Kenora Dr., Suite C Spring Valley, CA 91977
(619) 469-4312 campyonly.comjoebell.htmlOpen ↗

CyclArt 2590 Pioneer Ave. Suite A Vista, CA 92083-8427. Phone 760-599-1015. Fax 760-599-1017
cyclart.comcyclart.comOpen ↗

In article said:

I wish to repaint my 1988 Trek 420.

Are decals available? I hate to say, but Trek did not reply to my email.

For almost any bike manufacturer, the best way to find out about decals is:

1. Ask a dealer to ask the mfr.
2. Ask a bike painter

The very worst way to get anything from a bike manufacturer is probably email. A few do it well, a
few are hit or miss, the rest don't care and do not consider it a support channel for customers at
all. I think Trek is in the "hit or miss" category. Sometimes they do OK, other times black hole.

--Paul

Wayne Pein said:

Jeff Kwapil said:

My trusty Trek 420 has more than its share of scratches. I may have it repainted.

Quoted message said:

These painters do heirloom quality work, and that may be overkill from both and aesthetic and
monetary perspective for your "trusty" bike. I would consider having it powdercoated, which is
allegedly a more durable coating. There are several websites that do bicycle specific
powdercoating, but you might have a generic powdercoater in your area that could do it too.

I agree. I had my 30-year-old track bike powder-coated, and was amazed with the results. They can do
great things with powder-coat. Find a shop that does motorcycles and similar stuff locally. They
will be very good with the details. I had the frame powder-coated, and fork chromed, for $150.

--

David L. Johnson

__o | You will say Christ saith this and the apostles say this; but _`\(,_ | what canst thou say?
-- George Fox. (_)/ (_) |

"David L. Johnson" <David L. Johnson <[email hidden]>> wrote in message
news:<[email hidden]>...

Quoted message said:

Wayne Pein said:

Jeff Kwapil said:

My trusty Trek 420 has more than its share of scratches. I may have it repainted.

Quoted message said:

These painters do heirloom quality work, and that may be overkill from both and aesthetic and
monetary perspective for your "trusty" bike. I would consider having it powdercoated, which is
allegedly a more durable coating. There are several websites that do bicycle specific
powdercoating, but you might have a generic powdercoater in your area that could do it too.

I agree. I had my 30-year-old track bike powder-coated, and was amazed with the results. They
can do great things with powder-coat. Find a shop that does motorcycles and similar stuff
locally. They will be very good with the details. I had the frame powder-coated, and fork
chromed, for $150.

I'll add to the agreement. www.spectrumpowderworks.com does remarkable work--my Bianchi came back
looking more celeste than ever before, and the lugs show up very, very nicely. If I ever have a bike
custom built, I might very well have Spectrum do the paint job...

Wayne Pein <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

These painters do heirloom quality work, and that may be overkill from both and aesthetic and
monetary perspective for your "trusty" bike. I would consider having it powdercoated, which is
allegedly a more durable coating. There are several websites that do bicycle specific
powdercoating, but you might have a generic powdercoater in your area that could do it too.

Here's one that is not bicycle specific, but does bicycles pretty cheaply.

procoatings.comprocoatings.comOpen ↗

Wayne

I'd be a little leary of using a powdercoater who didn't do bicycles on a regular basis. I've seen
some *bad* powdercoat jobs on bicycles.

If you're near Portland, OR, Class Act does a lot of production work for major & minor
manufacturers:

Class Act Paint & Powder Inc 8700 NE Columbia Bv Portland, OR 97220-1329
(503) 254-6400

If you want an upscale paint job (probably overkill for an old Trek...), Acme is it: Acme Paint Shop
1640 Se 10th PORTLAND, OR 97214-3519
(504) 238-0829

Jeff

Andy M-S said:

I'll add to the agreement. www.spectrumpowderworks.com does remarkable work--my Bianchi came back
looking more celeste than ever before, and the lugs show up very, very nicely. If I ever have a
bike custom built, I might very well have Spectrum do the paint job...

I'm thinking about a new custom steel frame and have begun the preliminary search process. A couple
of builders I'm interested in do paint, but I would much rather have powdercoat. I haven't asked
them, but I'm wondering the likelihood of working out a deal.

Wayne

Quoted message said:

Joe Bell Bicycle Refinishing 3735 Kenora Dr., Suite C Spring Valley, CA 91977
(619) 469-4312 campyonly.comjoebell.htmlOpen ↗

CyclArt 2590 Pioneer Ave. Suite A Vista, CA 92083-8427. Phone 760-599-1015. Fax 760-599-1017
cyclart.comcyclart.comOpen ↗

Add Brian Bayliss to that list and you have some top notch and potentially expensive painters. These
guys are "the best." (I am sure there are others equally good but there are reasons that builders
ship bikes to Joe Bell from the east coast.)

I agree Powder Coating would probably be best for the Trek in question because of the cost, I just
had a frame powder coated for that reason.

But I think that in terms of durability and appearance, a paint job from any of these guys with a
clear coat will be superior to a Powder coat. And of course, there is that something about a top
notch paint job that just cannot be duplicated.

CyclArt does do powder coating so if you are in the area that is one way to go to make sure you do
get a good job.

Also, both CyclArt and JB and probably Bayliss have decals for many bikes.

jon isaacs

Cyclesmith in the San Diego area is another good option. They recently repainted my Masi
*perfectly*. It helps that they were the factory painter for Masi during all the California years.
🙂 BTW the cost was less than 1/2 of what Cyclart quoted me for the same job.

Phone # is 760-746-2522.

Jeff: Normally, decals & paint are only kept around for a couple of years, but your best bet would
be to go to your LBS and, assuming they sell TREK (or Klein or LeMond or Fisher), have them call
their inside sales rep and see if the decals are available. I wouldn't be too hopeful though! But
while you're at the shop, you might check out the decals on current TREK bikes and see if there are
any that might look nice on your bike, as they *could* order those for you.

--Mike-- Chain Reaction Bicycles chainreactionbicycles.comchainreactionbicycles.comOpen ↗

"Jeff Kwapil" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I wish to repaint my 1988 Trek 420.

Are decals available? I hate to say, but Trek did not reply to my email.

Love Trek bikes, Jeff

"Jeff Kwapil" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

My trusty Trek 420 has more than its share of scratches. I may have it repainted.

If you had an excellent frame-finishing experience, please post contact

info

Quoted message said:

for those responsible.

A couple that have been recommended to me:

Joe Bell Bicycle Refinishing 3735 Kenora Dr., Suite C Spring Valley, CA 91977
(619) 469-4312 campyonly.comjoebell.htmlOpen ↗

CyclArt 2590 Pioneer Ave. Suite A Vista, CA 92083-8427. Phone 760-599-1015. Fax 760-599-1017
cyclart.comcyclart.comOpen ↗