I don't know what's gone wrong but I just cannot get my front derailer adjusted to get the chain onto the largest chain wheel.
I have a GT I-Drive 4 mountain bike with a triple cog. I replaced the front derailer gear cable...which took me a bit of time to figure out that I had to thread the cable thru these fangled quick thumbyfinger gear change devices.
I had taken off the derailer (a Shimano Deore model) to clear the muck off it, but since replacing it I cannot seem to get it to reach far enough out to shift the chain onto the outer ring aarrggghh.
If I physically push the derailer to what appears to be it's maximum extension..it still does'nt seem far enough (?)
I have the high adjuster screw wound right out, I have made sure the cranks are torqued down correctly
Am I going crazy..or missing something obvious here. Anyone ever had a similar problem ?
"Satchmo" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I don't know what's gone wrong but I just cannot get my front derailer adjusted to get the chain onto the largest chain wheel.
I have a GT I-Drive 4 mountain bike with a triple cog. I replaced the front derailer gear cable...which took me a bit of time to figure out that I had to thread the cable thru these fangled quick thumbyfinger gear change devices.
I had taken off the derailer (a Shimano Deore model) to clear the muck off it, but since replacing it I cannot seem to get it to reach far enough out to shift the chain onto the outer ring aarrggghh.
If I physically push the derailer to what appears to be it's maximum extension..it still does'nt seem far enough (?)
I have the high adjuster screw wound right out, I have made sure the cranks are torqued down correctly
Am I going crazy..or missing something obvious here. Anyone ever had a similar problem ?
Cheers
Satchmo...gradually pulling my hair out.... :o(
Sounds like you've got the cable too loose (or do I mean too tight?). Tighten it of a little to give yourself more room to play with.
i.e. physically pull the cable a bit more through the clamp before you start playing with the derailleur adjustment.
Sounds like you've got the cable too loose (or do I mean too tight?). Tighten it of a little to give yourself more room to play with.
i.e. physically pull the cable a bit more through the clamp before you start playing with the derailleur adjustment.
Yes, too loose. That the first thing I would check as well. Cable should not be baggy when derailleur is on inner ring position. If having trouble getting it taut, release cable, set cable adjuster clockwise all the way, attach cable - pulling end with plyers, twiddle adjuster.
Other common problems are caused by poor positioning of the derailleur on the frame.
Sounds like you've got the cable too loose (or do I mean too tight?). Tighten it of a little to give yourself more room to play with.
i.e. physically pull the cable a bit more through the clamp before you start playing with the derailleur adjustment.
Yes, too loose. That the first thing I would check as well. Cable should not be baggy when derailleur is on inner ring position. If having trouble getting it taut, release cable, set cable adjuster clockwise all the way, attach cable - pulling end with plyers, twiddle adjuster.
Other common problems are caused by poor positioning of the derailleur on the frame.
