In 6 weeks of using an indoor trainer (mag), I've gotten two flat tires. Is this a common problem?
Do I need to inflate tires more, less? Thanks for any suggestions.
Road Cycling · Public discussion
trainer - flat tires
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Road Cycling
- Published
- 2 February 2003
- Last activity
- 3 February 2003
- Original author
- Laura
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 1,770
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Hi laura,
I have a mag trainer two. I was told tha it could be hard on the tires and the bike. I have had mine
for about a month and didn't get a flat yet. I may not have used it as much as you have. I filled
the rear tire with the same pressure I use on the road, 100 PSI. There is a tensioner that puts
pressure on the tire, either you have it two tight or to loose. To loose and the tire heats up, to
tight with low pressure could cause a snake bite (where the tube gets pinched between the rim and
the inside surface of the tire) and you'l notice when you repair the flat there are two holes.
That's the best I can offer. Bob "Laura" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
In 6 weeks of using an indoor trainer (mag), I've gotten two flat tires. Is this a common problem?
Do I need to inflate tires more, less? Thanks for any suggestions. -
"Laura" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
In 6 weeks of using an indoor trainer (mag), I've gotten two flat tires. Is this a common problem?
Do I need to inflate tires more, less? Thanks for any suggestions.I've never heard of it. It's quite possible you have a wire or piece of glass in your tire. If you
haven't already, carefully examine the spot on the tire that lines up with the hole in the tube,
often these things (especially little bits of wire) are hard to spot. -
Laura <[email hidden]> wrote let it be known in
:"]news:[email hidden]:Quoted message said:
In 6 weeks of using an indoor trainer (mag), I've gotten two flat tires. Is this a common problem?
Do I need to inflate tires more, less? Thanks for any suggestions.1) The next time you have the tire off, look inside the wheel and make sure the tape that covers the
inside ends of the spokes is still in place and not punctured by any of the spokes, or pushed
aside. If the metal end of a spoke is showing, it can easily poke a whole in the tube. If you are
in doubt, pick up some replacemet tape at your LBS and re-tape the wheel.2) You can also look very carefully at the tire. Maybe you picked up a piece of glass last summer
and it is still embedded in the tire. Before taking the tire apart after the next flat, mark the
tire and wheel so after you find where the flat is on the tube you can relate it to a specific
part of the wheel or tire and examine it more closely.3) If you are sure that there is no foreign object puncturing the tire, it MIGHT be a problem with
the tube not being seated well in the wheel when you inflate it. You may be assembling it not
noticing a pinch or fold in the tube when you put it together.Good luck. I have a friend who had so may 'unexplainable' flats with one set of wheels that he
finally got rid of them. Every 20 miles he would flat, and he never found the cause, which is
probably why he found them so cheap on Ebay in the first place!--
Curt Bousquet moc.enilnacs@PTNN < Reverse for email
Road biking in Southern VT and Western Mass.
My 2002 bike log: scanline.com2002.htmlOpen ↗
-
Quoted message said:
In 6 weeks of using an indoor trainer (mag), I've gotten two flat tires. Is this a common problem?
Do I need to inflate tires more, less? Thanks for any suggestions.What was the cause of the flats?
Jon Isaacs
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.