For the last couple of days I have had a creaking sound coming from my
Coker when I pedaled it hard. This was, of course, infrequent for me.
Usually the Coker is very stealthy, much more so than a bicycle,
because there is no chain or derailleur noise. I thought at first that
it might be spoke tension but I tested that and it was OK. The pedals
are new and I didn't check them. The bearings turn freely and
noiselessly. I ride curbs on my daily commute and hop off frequently
(I, of course, mean to do that) but didn't think that I stressed the
cranks enough to loosen them. My cranks have been on for a couple
thousand miles and, after the first few days of pedaling and
retightening, they have given me no audible problems. I broke down and
checked them last night. Sure enough, there was some play when I really
pushed hard on the cranks by hand. I retightened them with a 14mm
socket and both sides advanced more than a half turn. Today the Coker
was its old stealthy self again. I spent my commute today sneaking up
on pedestrians and more advanced wildlife and scaring the bejeesus out
of them. I'd forgotten how fun that was.
Moral: It could be anything but it's always the last thing you check.
--
harper
-Greg Harper
*jc is the only main man. there can be no other.*
------------------------------------------------------------------------
harper's Profile: http://www.unicyclist.com/profile/426
View this thread: http://www.unicyclist.com/thread/61959
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com